Nice Linear LNVR1-08P User Manual page 61

Below is the PTZ panel that appears with ordinary PTZ cameras�
1� PTZ control: Click on the arrow buttons to move towards the direction you wish to
move to�
2� Focus: Click on the Focus near and Focus far buttons to adjust camera focus�
3� Zoom: Use the Zoom in and Zoom out buttons to adjust the camera's zoom ratio�
4� Presets: If you configured preset positions, a list of preset positions will appear�
5� Speed: Adjusts the speed when moving across the field of view�
6� Patrol: If you configured preset positions into a patrolling tour, click on this button
and the camera will proceed with patrolling through the preset points�
This portal appears with a fisheye camera� Since it is for the fisheye camera, the PiP
and PTZ buttons will then be disabled�
IMPORTANT:
Due to the limitation of system resources, the fisheye dewarp (1R & 1P) can only take
place on one view cell, for one fisheye camera�
List of preset positions
Speed selector
Zoom in
Zoom out
Smart Surveillance
Focus far
Focus near
Starts patrol
61