Advanced Operation - Cobra Marine MR HH400 EU Owner's Manual

Advanced Operation

Operating Your Radio
Advanced Operation
Channel 16
This function gives you quick access to the calling Channel 16 from any
operational mode.
To switch to Channel 16:
Channel 16 Button
1. Press the Channel 16 button to change to Channel 16.
To exit the Channel 16 mode and return to whatever status
existed before entering this mode, press the Channel 16
button a again.
While in the Channel 16 mode, you can also press
the Channel Up and Channel Down buttons to
change channels.
Channel 16
If you press this button when Key Lock mode is On,
you will get a three-beep error message and your
radio will not change mode.
36 English
Operating Your Radio
Tri-Watch
•
Tri-Watch gives you one button access to scan the three locations of
most importance to you. Channel 16 will always be one of the scanned
locations. The other two locations will be stored in the radio. They can
be edited and/or recalled for future engagements of Tri-Watch mode.
NOTE
The radio must be squelched for tri-watch to function.
See page 31 for squelch procedure.
Tri-Watch Button
Tri-Watch and Memory Icons
Channel Up/Down Buttons
Advanced Operation
To program or edit the tri-watch locations:
1. Press and hold the Tri-Watch button. The Tri-Watch
and Memory icons on the LCD will be turned On.
2. Press the Channel Up or Channel Down button
to move to the channel you want to enter into
tri-watch location one.
3. Press the Tri-Watch button. You will hear a
two-beep confirmation signal.
4. Press the Channel Up or Channel Down button
to move to the channel you want to enter into
tri-watch location two.
5. Press the Tri-Watch button. You will hear a
two-beep confirmation signal and the Memory
icon will disappear from the LCD. The radio will
immediately engage tri-watch (see page 38
for further details).
Nothing comes close to a Cobra 37
®