Switching The Multimeter On And Off; Incorrect Wiring Alarm - VOLTCRAFT VC891 Operating Instructions Manual

11.4 AC voltage mode "V
Proceed as follows to measure AC voltages:
Turn the multimeter on and select
"V " mode. Press the "SELECT"
button to switch to "AC" mode.
" " and "V" will appear on the
display.
For lower voltages up to max. 600
mV, select the "mV" measurement
range.
Plug the red test lead into the V
measurement socket and the black
test lead into the COM measure-
ment socket.
Connect the two test probes in par-
allel to the object that you want to
measure (e.g. generator or circuit).
The measured value appears on
display.
After measuring, remove the test leads from the measured object and turn the
multimeter off.
The "V/AC" voltage range has an input resistance of ≥10 MΩ. This means that
there is almost no load on the circuit.
11.5 Measuring AC and DC voltage "V AC+DC"
You can measure mixed voltages as follows:
Turn the multimeter on and select "V AC+DC" mode. Press the "SELECT" but-
ton twice to switch to AC+DC mode. "
Perform the connection and measurement as described under "Measuring AC
voltage". The display shows the complete mixed voltage (AC+DC).
68
"
" and "V" will appear on the display.