Enabling Digital Audio Output; Listening To 3D Audio In 3D Mode; Resetting All Sound Settings - Samsung UN55H6350AF E-Manual

Enabling Digital Audio Output

MENU > Sound > Additional Settings
This Smart TV is SPDIF-enabled. The Sony Philips Digital Interface (SPDIF) provides digital audio
output to speakers and various digital devices, including A/V Receivers and home theaters.
Audio Format
Selects the Digital Audio output (SPDIF) format. The available Digital Audio output (SPDIF)
formats may vary depending on the input source.
Audio Delay
Try Now
This setting helps correct timing mismatches between the audio and video tracks when you are
watching TV and listening to audio through a digital audio device. Enabling the feature displays a
slide bar that you can use to adjust the delay by up to 250ms.
Dolby Digital Comp
Set Dolby Digital compression mode.
Auto Volume
Try Now
When you change channels, video sources, or content,
TV's volume level so that the volume level remains the same for all sources. For example, if you
switch from a streaming video application to a Blu-ray player or a favorite TV channel,
Volume can modify the volume up to 12db to equalize the sound.
The Auto Volume
of volume adjustment.
viewing. If you want to use the volume control of a connected source device to control the sound,
deactivate the
device, the device's volume control may not function properly.

Listening to 3D Audio in 3D Mode

MENU > Sound > 3D Audio
This function is only available with the LED 6400 series and higher.
3D audio technology provides immersive sound that matches the pop-up effect of 3D video by using
perspective in the audio depth control.
"
This function is only available in 3D mode.

Resetting All Sound Settings

MENU > Sound > Reset Sound
Use to reset all sound settings to the factory defaults.
Try Now
Try Now
Try Now
function has two settings:
Night applies a slightly lower volume level and is ideal for late-night TV
Auto Volume function. When you use the
Try Now
Auto Volume
Normal and Night. Normal
Auto Volume
automatically adjusts the
Auto
applies a normal level
function with a source