MSI 945GM2-FI User Manual page 48

MS-9642 Mainboard
Wake-Up By PCI Card
When setting to [Enabled], this setting allows your system to be awakened
from the power saving modes through any event on PCI PME (Power Man-
agement Event).
Power On by Ring
An input signal on the serial Ring Indicator (RI) line (in other words, an
incoming call on the modem) awakens the system from a soft off state.
USB KB Wake-Up from S3
This setting allows you to enter "Any Key" (max. 8 numbers) to wake up the
system from S3 state.
Resume By Alarm
When [Enabled], your can set the date and time at which the RTC (real-time
clock) alarm awakens the system from suspend mode.
Date (of Month) Alarm
When Resume By Alarm is set to [Enabled], the field specifies the month
for Resume By Alarm.
Time (hh:mm:ss) Alarm
You can choose what hour, minute and second the system will boot up.
PWRON After PWR-Fail
This item specifies whether your system will reboot after a power failure or
interrupt occurs. Available settings are:
[Off]
[On]
[Former-sts]
3-16
Leaves the computer in the power off state.
Leaves the computer in the power on state.
Restores the system to the status before power fail-
ure or interrupt occurred.