AEG FAVORIT 55022WO User Manual page 42

42 www.aeg.com
German de-
grees (°dH)
11 - 14
4 - 10
<4
1) Factory setting.
2) Do not use salt at this level.
How to set the water softener
level
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
start to flash and the display is blank.
2. Press
• The indicators
• The indicator
continues to flash
• The display shows the current
setting: e.g.
3. Press
change the setting. Each time you
press
increases. After level 10 you will start
again from level by 1
4. Press the on/off button to confirm
the setting.
6.3 The rinse aid dispenser
The rinse aid helps to dry the dishes
without streaks and stains.
The rinse aid is automatically released
during the hot rinse phase.
Use of rinse aid and multi-
tablets together
When you activate the option Multitab,
the rinse aid dispenser no longer
French degrees
(°fH)
19 - 25
7 - 18
<7
and
until the indicators
, and
and
go off.
= level 5.
repeatedly to
the level number
mmol/l Clarke de-
grees
1.9 - 2.5 13 - 17
0.7 - 1.8 5 - 12
<0.7 < 5
releases rinse aid. However if you are
using multi-tablets and the drying results
are not satisfactory, we suggest to use
multi-tablets and rinse aid together. In
this case you have to activate the rinse
aid dispenser.
The rinse aid dispenser will remain
activated until you modify the setting
again
How to activate the rinse aid
dispenser
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
start to flash and the display is blank.
2. Press
• The indicators
• The indicator
flash.
• The display shows the current
setting.
–
deactivated.
–
activated.
3. Press
4. Press the on/off button to confirm
the setting.
5. Adjust the dosage of rinse aid.
6. Fill the rinse aid dispenser.
Water softener lev-
el
3
2
2)
1
and
until the indicators
, and
.
and
go off.
continues to
= rinse aid dispenser
= rinse aid dispenser
to change the setting.