Advertisement
Motion Sensor LED Cabinet Light
*PLEASE NOTE: Once the remote has been used, even in auto mode, the
remote overrides the switch function selected on the light itself. To reset, switch the
unit to OFF and then back to ON or AUTO mode* This will need to be repeated
after each remote use if you are wanting to be able to use the AUTO (Motion Senor)
function.
How to use
The Light has 3 working modes. (AUTO – Motion Sensor, OFF & ON-stays on all
the time)
1. Remove plastic protective film from the top of the light.
2. Pull out the plastic tab from battery compartment, on the remote control.
3. Slide the switch on the light to ON, the light will come on and stay on.
4. Slide switch to OFF, to turn the light off.
5. Slide switch to AUTO, to operate in the motion sensor mode. Light will work only
in dark or shadowed/shaded areas. The light will turn on automatically when motion
User Manual
Model: CP-CL04
Advertisement
Table of Contents
Related Manuals for PROLED CP-CL04
Summary of Contents for PROLED CP-CL04
- Page 1 Motion Sensor LED Cabinet Light User Manual Model: CP-CL04 *PLEASE NOTE: Once the remote has been used, even in auto mode, the remote overrides the switch function selected on the light itself. To reset, switch the unit to OFF and then back to ON or AUTO mode* This will need to be repeated after each remote use if you are wanting to be able to use the AUTO (Motion Senor) function.
- Page 2 is detected within range. The light will turn off automatically after approximately 90 seconds, or when no motion is detected. Slide the switch to “OFF” to save battery power if you do not use the light for a long time. 7.
- Page 3 How to install the under-cabinet light 1. Stick it directly to any metal surface. 2. Use metal bracket with tape, to stick anywhere you want. Specification Product Dimension 11.8 x 1.6 x 0.90 inches Input Voltage 120V 60Hz Battery 3.7V 1000mAh Charge Time approx.
Need help?
Do you have a question about the CP-CL04 and is the answer not in the manual?
Questions and answers