Introduction; Read Me First; Overview - XAiOX TrapScout SiRF III User Manual

Speed camera detector functionality and voice prompt
Table of Contents

Advertisement

User's Manual XAiOX TrapScout SiRF III Bluetooth GPS Receiver

1. Introduction

1.1 Read Me First

• The battery must be charged for at least 8 hours for 'INITIAL' use. The LED2 (GREEN) will
turn off after 3 hours' charging, please keep on charging for 5 more hours. Thereafter, for
each time charging the battery, please fully charge for 3 hours.
• We strongly recommend that remove the battery if the device will not be used for over 2
weeks.
• For fast data tracking purpose staying still before get fixed is recommended.
(first FIX then GO!!)
• Please note that the device will only receive the signal under open sky. Therefore, putting
the device under the windshield is recommended.

1.2 Overview

TrapScout Bluetooth GPS receiver, a total solution of GPS Bluetooth wireless technology, is high
quality design dedicated to the user who is usually carrying a portable device such as PDAs/smart
phones all the time.
TrapScout allows 22 hours continuous use with a single battery charge. TrapScout uses GPS
technology to provide accurate warnings to fixed and mobile speed cameras in the road ahead.
The unit also includes some nice features, such as vibration sensor for power management and
POI update.
The TrapScout does not only transmit satellite information to the PDA or smart phone via
Bluetooth but also become a G-Mouse GPS receiver through a data cable to deliver satellite
information to the device without Bluetooth interface.
-3-

Advertisement

Table of Contents
loading

Table of Contents