1. Manuals
  2. Brands
  3. influencer Manuals
  4. Camera Accessories
  5. INVRGB14K
  6. Manual

influencer INVRGB14K Manual

14 inch rgbw ring light kit with tripod
Hide thumbs
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
14 INCH RGBW
RING LIGHT KIT
WITH TRIPOD
Welcome to the #influencer
14 Inch RGBW Ring Light Kit.
Let's get you up to speed so
you can start creating great
content!
FEATURES
• Tripod 73cm-210cm
• LED Ring Light
• Single and Double Phone Mount
• Microphone Arm
• Wireless Selfie Remote
• Lighting Remote Control
• Cold shoe adaptor
*Ring light is 14 inch high as measured from
mounting point to top of the ring.
INVRGB14K

Advertisement

Table of Contents
loading

Related Manuals for influencer INVRGB14K

Summary of Contents for influencer INVRGB14K

  • Page 1 14 INCH RGBW RING LIGHT KIT WITH TRIPOD Welcome to the #influencer 14 Inch RGBW Ring Light Kit. Let’s get you up to speed so you can start creating great content! FEATURES • Tripod 73cm-210cm • LED Ring Light • Single and Double Phone Mount •...

  • Page 2: Section 1: Tripod

    INCLUDED 1 x 8 Inch ring light 1 x Camera mount 1 x Phone mount 1 x Dual phone bracket 1 x Microphone mount Stabilising bars ASSEMBLY Assembly of the 14 Inch RGBW Ring Light Kit is broken down into 5 sections: tripod, ring light, phone mount, microphone mount and camera mount.

  • Page 3: Section 2: Ring Light

    SECTION 2: RING LIGHT 1. Remove the assembled ring light from packaging. 2. Pull down the base mount of ring light so that one of the adjustment screws is lower than the other (Fig. 1). 3. You can tilt the ring light by loosening the top adjustment screw and then tightening once the ring light is in the desired position (Fig.

  • Page 4: Section 3: Phone Mount

    SECTION 3: PHONE MOUNT There are multiple phone mounting options in this kit. A. Centre ring mounting: 1. Insert the phone metal mount onto the ring light and tighten the base adjustment ring clockwise to secure (Fig. 1). B. Dual phone mounting: 1.

  • Page 5: Section 4: Microphone Mount

    SECTION 4: MICROPHONE MOUNT 1. Unscrew and pull out bottom adjustment screw, then attach mount to top of tripod. Re-insert adjustment screw and tighten with adjustment ring until mount is secure (Fig. 2). 2. Unscrew bottom adjustment screw, then attach mount to top of tripod. Re-insert adjustment screw and tighten with adjustment ring until mount is secure (Fig.

  • Page 6: Section 5: Camera Mount

    Note: Don't over extend the microphone arm otherwise you risk tipping the tripod over. Don't extend past / . SECTION 5: CAMERA MOUNT 1. Attach the metal camera mount to the camera base first. 2. Attach the camera base to the ring by screwing the camera onto the mount.
  • Page 7 RF REMOTE FUNCTION INSTRUCTION (from top to down, from left to right) Power on /off Switch for dual colour modes Brightness down Dual white colour modes - brightness down Brightness up Dual white colour modes - brightness up Cold white light Cold white light mode Mixed white light Mixed white light mode...
  • Page 8 -- dizziness, altered vision, eye or muscle twitches, loss of awareness, disorientation, any involuntary movement, or convulsions - IMMEDIATELY discontinue use and consult your physician before resuming using. Influencer™ PO Box 5658 Brendale QLD Australia 4500 Customer Support 1800 812 261...

Table of Contents