MSI FX400 User Manual
  1. Manuals
  2. Brands
  3. MSI Manuals
  4. Laptop
  5. FX400
  6. User manual
MSI FX400 User Manual

MSI FX400 User Manual

Msi fx400: user guide
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
CHAPTER 1
Preface

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FX400 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for MSI FX400

Summary of Contents for MSI FX400

  • Page 1 CHAPTER 1 Preface...

  • Page 2: Table Of Contents

    Table of Content Preface Table of Content ... 1-2 Regulations Information... 1-5 FCC-B Radio Frequency Interference Statement ... 1-5 FCC Conditions ... 1-6 CE Conformity ... 1-6 Safety Instructions... 1-7 Safety Guideline for Using Lithium Battery ...1-11 WEEE Statement ... 1-15 Optical Device Drive Notice ...
  • Page 3 Right Side View ... 2-16 Left Side View... 2-18 Rear Side View... 2-20 Bottom Side View ... 2-21 Getting Started Power Management ... 3-2 Connecting the AC Power ... 3-2 Using the Battery Power... 3-4 ECO Engine -- Power Saving Function ... 3-9 Power Management in Windows OS ...3-11 Energy Saving Tips...
  • Page 4 ExpressCard Installation... 3-38 Removing the ExpressCard ... 3-38 Installing the ExpressCard ... 3-38 Components Replacement and Upgrade ... 3-40 BIOS Setup About BIOS Setup... 4-2 When to Use BIOS Setup... 4-2 How to Run BIOS Setup... 4-2 Control Keys ... 4-3 BIOS Setup Menu...

  • Page 5: Regulations Information

    Regulations Information FCC-B Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

  • Page 6: Fcc Conditions

    Shield interface cables and AC power cord, if any, must be used in order to comply with the emission limits. FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference.

  • Page 7: Safety Instructions

    Safety Instructions Read the safety instructions carefully and thoroughly. All cautions and warnings on the equipment or user’s manual should be noted. Keep the User’s Guide that comes with the package for future reference. Keep this equipment away from humidity and high temperature. Lay this equipment on a stable surface before setting it up.
  • Page 8 Make sure the power voltage is within safety range and has been adjusted properly to the value of 100~240V before connecting the equipment to the power outlet. Always unplug the AC power cord before installing any add-on card or module to the equipment.
  • Page 9 When installing the coaxial cable to the TV Tuner, it is necessary to ensure that the metal shield is reliable connected to protective earthing system of the building. Cable distribution system should be grounded (earthed) in accordance with ANSI/NFPA 70, the National Electrical Code (NEC), in particular Section 820.93, Grounding of Outer Conductive Shield of a Coaxial Cable.

  • Page 10: Environmental Policy

    1-10 Green Product Features Reduced energy consumption during use and stand-by Limited use of substances harmful to the environment and health Easily dismantled and recycled Reduced use of natural resources by encouraging recycling Extended product lifetime through easy upgrades Reduced solid waste production through take-back policy Environmental Policy The product has been designed to enable proper reuse of parts and recycling and should not be thrown away...

  • Page 11: Safety Guideline For Using Lithium Battery

    1-11 Safety Guideline for Using Lithium Battery (English) CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the equipment manufacturer. Discard used batteries according to manufacturer’s instructions. (French) (Français) ATTENTION: II y a danger d’explosion s’il y a remplacement incorrect de la batterie. Remplacer uniquement avec une batterie du meme type ou d’un type équivalent recommandé...
  • Page 12 1-12 üreticinin talimatlarına göre degerlendiriniz. (Greek) (Ελληνικά) ΠΡΟΣΟΧΗ: Κίνδυνος έκρηξης εάν η μπαταρία τοποθετηθεί λανθασμένα. Να αντικαθιστάτε μόνο με τον ίδιο ή αντίστοιχο τύπο με αυτό που συνιστά ο κατασκευαστής του εξοπλισμού. Να απορρίπτετε τις χρησιμοποιημένες μπαταρίες ως απορρίμματα σύμφωνα με τις οδηγίες του κατασκευαστή. (Polish) (Polski) OSTRZEŻENIE: Nieprawidłowa wymiana może spowodować...
  • Page 13 1-13 권장하는 것과 동일하거나 동등한 배터리로만 교체하십시오. 사용한 배터리는 제조업체의 지침에 따라 폐기하십시오. (Vietnamese) (Tieng Viet) LƯU Ý: Thay thế pin không tương thích có thể dẫn đến nguy cơ bị nổ. Chỉ thay thế bằng pin cùng loại hoặc loại tương ứng khuyên dùng bởi nhà sản xuất thiết bị. Vứt bỏ pin đã sử dụng theo hướng dẫn của nhà sản xuất.
  • Page 14 1-14 utilizadas de acordo com as instruções do fabricante. (Swedish) (Svenska) VARNING: Explosionsfara vid felaktigt batteribyte. Använd samma batterityp eller en ekvivalent typ som rekommenderas av apparattillverkaren. Kassera använt batteri enligt fabrikantens instruction. (Finnish) (Suomi) VAROITUS: Paristo voi räjähtää, jos se on virheellisesti asennettu. valmistajan suosittelemaan tyyppiin.

  • Page 15: Weee Statement

    1-15 proizvođača. (Estonian) (Eesti) ETTEVAATUST! Plahvatusoht, kui aku on valesti paigaldatud. Asendage ainult sama või tootja poolt soovitatud võrdväärse akuga. Hävitage kasutatud aku vastavalt tootja juhistele. ‫در ﺻﻮرت ﺗﻌﻮﻳﺾ ﺑﺎﺗﺮﯼ، ﺗﻨﻬﺎ از ﺑﺎﺗﺮﻳﻬﺎﯼ ﭘﻴﺸﻨﻬﺎدﯼ ﺷﺮﮐﺖ ﺗﻮﻟﻴﺪ ﮐﻨﻨﺪﻩ‬ ‫ﻣﻦ ﻗﺒﻞ‬ ‫ﺑﻪ‬ ‫ﻓﻘﻂ...
  • Page 16 1-16 (German) (Deutsch) Gemäß der Richtlinie 2002/96/EG über Elektro- und Elektronik-Altgeräte dürfen Elektro- und Elektronik-Altgeräte nicht mehr als kommunale Abfälle entsorgt werden, die sich auf 13.August, 2005 wirken. Und der Hersteller von bedeckt Elektronik-Altgeräte gesetzlich zur gebrachten Produkte am Ende seines Baruchbarkeitsdauer zurückzunehmen.
  • Page 17 1-17 (Greek) (Ελληνικά) Σύμφωνα με την Οδηγία 2002/96/ΕΚ της Ευρωπαϊκής Ένωσης («ΕΕ») περί Απόρριψης Ηλεκτρικού και Ηλεκτρονικού Εξοπλισμού (WEEE), η οποία λαμβάνει ισχύ στις 13 Αυγούστου 2005, τα προϊόντα «ηλεκτρικού και ηλεκτρονικού εξοπλισμού» δεν είναι δυνατόν να απορριφθούν πλέον ως κοινά απορρίμματα και οι κατασκευαστές κεκαλυμμένου...
  • Page 18 1-18 文规定「电机电子设备产品」不可再以都市废弃物处理，且所有相关电子设备制造商，均须在产品使用寿命结束后进行回 收。 (Japanese) (日本語) 2005 年 8 月 13 日以降に EU 加盟国を流通する電気・電子製品には WEEE 指令によりゴミ箱に×印のリサ イクルマークの表示が義務づけられており、廃棄物として捨てることの禁止とリサイクルが義務づけられています。 (Korean) (한국어) 2005 년 8 월 13 일자로 시행된 폐전기전자제품에 대한 유럽연합("EU") 지침, 지침 2002/96/EC 에 의거하여, "전기전자제품"은 일반 쓰레기로 폐기할 수 없으며 제품의 수명이 다하면 해당 전자제품의 제조업체가 이러한...
  • Page 19 1-19 odbačeni kao običan otpad i proizvođači ove opreme biće prinuđeni da uzmu natrag ove proizvode na kraju njihovog uobičajenog veka trajanja. (Netherlands) (Nederlands) De richtlijn van de Europese Unie (EU) met betrekking tot Vervuiling van Electrische en Electronische producten (2002/96/EC), die op 13 Augustus 2005 in zal gaan kunnen niet meer beschouwd worden als vervuiling.
  • Page 20 1-20 (Slovak) (Slovenčina) Na základe smernice Európskej únie („EU“) o elektrických a elektronických zariadeniach číslo 2002/96/ES, ktorá vstúpila do platnosti 13. augusta 2005, výrobky, ktorými sú „elektrické a elektronické zariadenia” nesmú byť zneškodňované spolu s komunálnym odpadom a výrobcovia patričných elektronických zariadení sú povinní takéto výrobky na konci životnosti prevziať...
  • Page 21 1-21 2002/96/EC, koja je na snazi od 13. kolovoza 2005., "električni i elektronički uređaji" se ne smiju više bacati zajedno s kućnim otpadom i proizvođači su obvezni zbrinuti takve proizvode na kraju njihovog životnog vijeka. (Estonian) (Eesti) Vastavalt Euroopa Liidu ("EL") direktiivile 2002/96/EÜ (elektri- ja elektroonikaseadmete jäätmete kohta), mis jõustus 13.

  • Page 22: Optical Device Drive Notice

    1-22 Optical Device Drive Notice CAUTION: This appliance contains a laser system and is classified as a “CLASS 1 LASER PRODUCT.” To use this model properly, read the instruction manual carefully and keep this manual for your future reference. In case of any trouble with this model, please contact your nearest “AUTHORIZED service station.”...

  • Page 23: Introductions

    CHAPTER 2 Introductions...

  • Page 24: Manual Map

    Congratulations on becoming an user of this notebook, the finely designed notebook. This brand-new exquisite notebook will give you a delightful and professional experience in using notebook. We are proud to tell our users that this notebook is thoroughly tested and certified by our reputation for unsurpassed dependability and customer satisfaction Manual Map This User’s Manual provides instructions and illustrations on how to operate this notebook.

  • Page 25: Unpacking

    Chapter 4, BIOS Setup, provides information on BIOS Setup program and allows you to configure the system for optimum use. Unpacking First, unpack the shipping carton and check all items carefully. If any item contained is damaged or missing, please contact your local dealer immediately. Also, keep the box and packing materials in case you need to ship the unit in the future.

  • Page 26: Specification

    Specification Physical Characteristic Dimension Weight Processor L3 Cache FSB Speed Special Notification Core Chips Core Chips Memory Technology Memory Maximum 350 (W) x 235 (D) x 29.7~33 (H) mm 2.2 kg (with 6 cell battery) Intel Micro FCPGA Intel Calpella Dual core 3MB (Based on CPU) 1066 MHz The actual processor preinstalled in the notebook depends on...
  • Page 27 Power AC/DC Adapter Battery Type RTC Battery Special Notification Storage (Items listed here may vary without notice) HDD form factor Optical Drive Device Special Notification I/O Port Monitor (VGA) HDMI E-SATA Mic-in 65W, 19V Input: 100~240V~1.5A 50~60Hz Output: 19V 3.42A 6 cells The actual AC/DC Adapter and battery pack that come with the package may vary without notice.

  • Page 28: Communication Port

    Headphone-out Internal Microphone RJ45 RJ11 Card Reader Communication Port (Items listed here may vary without notice) 56K Fax/MODEM Wireless LAN Bluetooth Display LCD Type Brightness Video Graphics VRAM Dual View Function External Display Output x 1 (MMC/ SD) The supported memory cards may vary without notice. Optionally Supported 10/100/1000 Ethernet Support...

  • Page 29: Software & Bios

    WebCam CMOS Audio Internal Speaker Sound Volume Software & BIOS USB Flash Boot BIOS Others Compliance Kensington Lock Hole 1.3M pixel 2 speakers with housing Adjust by K/B hot-key & SW Yes, USB floppy boot up DOS only Fast Boot Support --- Yes WHQL...

  • Page 30: Product Overview

    Product Overview This section provides the description of basic aspects of the notebook. It will help you to know more about the appearance of this notebook before using it. Please be aware that the notebook shown in this section may vary from the actual one that users purchased. Top-open View The figure of top-open view and description shown below will lead you to browse the main operating area of your notebook.
  • Page 31 1. Webcam/ Webcam LED (optional) This built-in Webcam can be used for picture taking, video recoding or conferencing, and any other interactive applications. Webcam LED indicator, next to the webcam, grows orange when webcam function is activated; LED goes out when this function is turned off. 2.
  • Page 32 2-10 4. Quick Launch Buttons Press the quick launch buttons to activate the specific applications or tools. (Turbo Drive Engine) WLAN (WiFi) Cinema Pro Volume Up Volume Down When AC power is connected, press this button to activate the TDE function.
  • Page 33 2-11 5. Touchpad Switch Button Press this button to enable or disable the touchpad function. 6. Touchpad This is the pointing device of the notebook. 7. Keyboard The built-in keyboard provides all the functions of a full-sized keyboard. Quick Launch [Fn] Buttons Use the [Fn] buttons on the keyboard to activate the specific applications or tools.

  • Page 34: Internal Microphone

    2-12 Webcam WLAN (WiFi) Bluetooth (optional) 8. Internal Microphone There is built-in microphone and its function is the same with microphone. Refer to the Power Management section in chapter 3 of this manual for the detailed information of this ECO Engine, Power Saving Function.

  • Page 35: Front Side View

    2-13 Front Side View 1. Status LED Hard Disk/ Optical Drive Device In-use (optional) Blinking blue when the system is accessing the hard disk drive or the optical drive device. Num Lock: Glowing blue when the Num Lock function is activated. Caps Lock: Glowing blue when the Caps Lock function is activated.
  • Page 36 2-13 Front Side View 1. Status LED Hard Disk/ Optical Drive Device In-use (optional) Blinking blue when the system is accessing the hard disk drive or the optical drive device. Num Lock: Glowing blue when the Num Lock function is activated. Caps Lock: Glowing blue when the Caps Lock function is activated.
  • Page 37 2-14 Bluetooth Bluetooth LED indicator glows blue when Bluetooth function is enabled. Warning: For flight safety consideration, make sure this LED indicator goes out when you are in flight. Bluetooth Note: The Bluetooth Function may be optional supported depending on the model users purchased.
  • Page 38 2-15 Battery Status Glowing blue when the battery is being charged. Glowing amber when the battery is in low battery status. Blinking amber if the battery fails and it is recommended to replace a new battery. Consult the local dealer for purchasing an equivalent type of battery recommended by the manufacturer.

  • Page 39: Right Side View

    2-16 Right Side View 1. Audio Port Connectors Make high quality sound blaster with stereo system and Hi-Fi function supported. 2. USB Port The USB 2.0 port allows you to connect USB-interface peripheral devices, such as the mouse, keyboard, modem, portable hard disk module, printer and more. Audio Port Connectors USB Port Kensington Lock...

  • Page 40: Kensington Lock

    2-17 3. Kensington Lock This notebook provides a Kensington Lock place with a key or some mechanical PIN device and attached through a rubberised metal cable. The end of the cable has a small loop which allows the whole cable to be looped around a permanent object, such as a heavy table or other similar equipment, thus securing the notebook in place.

  • Page 41: Left Side View

    2-18 Left Side View 1. Power Connector To connect the AC/DC adapter and supply power for the notebook. 2. Ventilator The ventilator is designed to cool the system. DO NOT block the ventilator for air circulation. 3. E-SATA Connector (External Serial ATA) The E-SATA Connector allows you to connect an external Serial ATA hard disk device.

  • Page 42: Hdmi Connector

    2-19 4. USB Port The USB 2.0 port allows you to connect USB-interface peripheral devices, such as the mouse, keyboard, modem, portable hard disk module, printer and more. 5. RJ-45 Connector The 10/100 Ethernet connector is used to connect a LAN cable for network connection. 6.

  • Page 43: Rear Side View

    2-20 Rear Side View Battery Pack 1. Battery Pack This notebook will be powered by the battery pack when the AC adapter is disconnected.

  • Page 44: Bottom Side View

    2-21 Bottom Side View 1. Battery Release Button It is a bounce-back device as a preparation for releasing the battery pack. Slide it with one hand and pull the battery pack carefully with the other. 2. Battery Lock/Unlock Button Battery cannot be moved when the button is positioned on lock status. Once the button is slid to unlock position, the battery is removable.

  • Page 45: Battery Pack

    2-22 3. Battery Pack This notebook will be powered by the battery pack when the AC/DC adapter is disconnected. 4. Ventilator The ventilator is designed to cool the system. DO NOT block the ventilator for air circulation.

  • Page 46: Getting Started

    CHAPTER 3 Getting Started...

  • Page 47: Power Management

    Power Management Connecting the AC power It is strongly recommended to connect the AC/DC adapter to the notebook and use the AC power while using this notebook for the first time. When the AC power is connected, recharging the battery will start immediately. Note that the AC/DC adapter included in the package is approved for your notebook;...

  • Page 48: Disconnecting The Ac Power

    Connecting the AC Power 1. Unpack the package to find the AC/DC adapter and power cord. 2. Attach the power cord to the connector of the AC/DC adapter. 3. Plug the DC end of the adapter to the notebook, and the male end of the power cord to the electrical outlet.

  • Page 49: Using The Battery Power

    Using the Battery Power This notebook is equipped with a high-capacity Li-ion battery pack. The rechargeable Li-ion battery pack is an internal power source of the notebook. Be aware of that this battery pack may be damaged if users try to disassemble the battery pack on their own.

  • Page 50: Installing The Battery Pack

    Installing the Battery Pack To insert the battery pack, following the steps below: 1. Locate the steady gutter of the battery pack, and the battery bolt on the battery tray as shown right. 2. Align the steady gutter and battery bolt with correct orientation and make sure they are joined properly.

  • Page 51: Releasing The Battery Pack

    Releasing the Battery Pack To release the battery pack, following the steps below: Make sure the notebook is turned off, and the AC power is disconnected. Press the lock/unlock button to the unlocked position. Locate the battery release button on the bottom side.

  • Page 52: Conserving Battery Power

    Battery Safety Tips Replacing or handling the battery incorrectly may present a risk of fire or explosion, which could cause serious injury. Only replace the main battery pack with the same or equivalent type of battery. Do not disassemble, short-circuit or incinerate batteries or store them to temperatures above +60°...

  • Page 53: Charging The Battery Pack

    Charging the Battery Pack The battery pack can be recharged while it is installed in the notebook. Please pay attention to the following tips before recharging the battery: If a charged battery pack is not available, save your work and close all running programs and shut down the system or Save-to-Disk.

  • Page 54: Eco Engine -- Power Saving Function

    ECO Engine -- Power Saving Function ECO Engine, the outstanding and unique power saving function, provides various power saving modes – Gaming mode, Movie mode, Presentation mode, Office mode, and Turbo Battery mode, to extend the battery running time while performing different tasks with this notebook. Read the instructions bellow to activate the ECO Engine power saving function: 1.
  • Page 55 3-10 Presentation Mode Select this mode while performing presentation applications. Office Mode Select this mode while dealing with office documentation tasks. Turbo Battery Mode Select this mode to maximize the battery running time. ECO Off Selected to disable ECO Engine.

  • Page 56: Power Management In Windows Os

    3-11 Power Management in Windows OS Power management of personal computers (PCs) and monitors has the potential to save significant amounts of electricity as well as deliver environmental benefits. To be energy efficient, turn off your display or set your PC to standby/hibernate mode after a period of user inactivity. Follow the instructions below to adjust the power management settings in Windows OS: 1.
  • Page 57 3-12...

  • Page 58: Energy Saving Tips

    3-13 Energy Saving Tips Activate the ECO power saving function to manage the computer’s energy consumption. Turn off the monitor after a period of user inactivity. Utilize the Fn and F12 sleep mode keys to turn into power saving mode. Tune the settings in Power Options under Windows OS to optimize the computer’s power management.

  • Page 59: Basic Operations

    3-14 Basic Operations If you are a beginner to the notebook, please read the following instructions to assure your own safety, and make yourself comfortable during the operations. Safety and Comfort Tips The notebook is a portable platform that allows you to work anywhere. However, choosing a good workspace is important if you have to work with your notebook for a long period of time.

  • Page 60: Having A Good Work Habit

    3-15 1. Keep your hands and feet with optimal comfort. 2. Adjust the angle and position of LCD panel. 3. Adjust the desk’s height. 4. Sit straight and keep a good posture. 5. Adjust the chair’s height. Having a Good Work Habit Have a good work habit is important if you have to work with your notebook for long periods of time;...

  • Page 61: Knowing The Keyboard

    3-16 Knowing the Keyboard This notebook provides a full-functioned keyboard. categories: Typewriter keys, Cursor keys, Numeric keys and Function keys. The keyboard shown here may vary from the actual one, depending on which county users purchase the notebook. This keyboard can be divided into four Typewriter keys Numeric keys Cursor keys /...

  • Page 62: Typewriter Keys

    3-17 Typewriter Keys In addition to providing the major function of the keyboard, these typewrite keys also provide several keys for special purposes, such as [Ctrl,] [Alt,] and [Esc] key. When the lock keys are pressed, the corresponding LEDs will light up to indicate their status: Num Lock: Press and hold the [Fn] key and press this key to toggle the Num Lock on and off.

  • Page 63: Cursor Keys

    3-18 Cursor Keys The four cursor (arrow) keys and [Home], [PgUp], [PgDn], [End] keys are used to control the cursor movement. Move the cursor left for one space. Move the cursor right for one space. Move the cursor up for one line. Move the cursor down for one line.

  • Page 64: Function Keys

    3-19 The Backspace key, [Ins] and [Del] keys at upper right corner are used for editing purpose. This key is used to switch the typing mode between “insert” and “overtype” modes. Press this key to delete one character to the right of the cursor and move the following text left for one space.
  • Page 65 3-20 [Fn] Key Switch the display output mode between the LCD, external monitor and both. Enable or disable the touchpad function. Decrease the LCD brightness. Increase the LCD brightness. Decrease the built-in speaker’s volume. Increase the built-in speaker’s volume. Disable the computer’s audio function.
  • Page 66 3-21 Quick Launch [Fn] Buttons Use the [Fn] buttons on the keyboard to activate the specific applications or tools. With the help of these quick launch buttons, users will be able to do work more efficiently. User Defined Windows Search (optional) ECO Engine (Power Saving)
  • Page 67 3-22 Webcam WLAN (WiFi) Bluetooth (optional) Press and hold the Fn button, and then press the F6 button to turn the Webcam function on. Press again to turn it off. Press and hold the Fn button, and then press the F8 button repeatedly to turn the Wireless LAN (WiFi) function on or off recurrently.

  • Page 68: Knowing The Touchpad

    3-23 Knowing the Touchpad The touchpad integrated in your notebook is a pointing device that is compatible with standard mouse, allowing you to control the notebook by pointing the location of the cursor on the screen and making selection with its two buttons. 1.

  • Page 69: Using The Touchpad

    3-24 Using the Touchpad Read the following description to learn how to use the touchpad: Configuring the Touchpad You can customize the pointing device to meet your personal needs. For example, if you are a left-handed user, you may want to swap the functions of the two buttons. In addition, you can change the size, shape, moving speed and other advanced features of the cursor on the screen.
  • Page 70 3-25 that your each tap on the touchpad is equivalent to pressing the left button. Tapping twice more rapidly on the touchpad is to execute a double-click. Drag and Drop You can move files or objects in your notebook by using drag-and-drop. To do so, place the cursor on the desired item and slightly tap twice on the touchpad, and then keep your fingertip in contact with the touchpad on the second tap.

  • Page 71: About Hard Disk Drive

    3-26 About Hard Disk Drive Your notebook is equipped with a 2.5-inch hard disk drive. The hard disk drive is a storage device with much higher speed and larger capacity than other storage devices, such as the floppy disk drive and optical storage device.

  • Page 72: Using The Optical Storage Device

    3-27 Using the Optical Storage Device Your notebook is equipped with an optical storage device. The actual device preinstalled in your notebook depends on the model you purchased. DVD Super Multi: Works as a multi-functional DVD Dual Drive and a DVD RAM Drive. It is capable to write CD-R, CD-RW, DVD-R/DVD-RW, or DVD+R/DVD+RW formats, and so on.

  • Page 73: Inserting The Disk

    3-28 Inserting the Disk The following instructions describe the general procedure when operating the optical storage device: 1. Confirm that the notebook is turned on. 2. Press the eject button on the panel and 3. Gently pull the tray out until fully 4.
  • Page 74 3-29 Removing the Disk Follow the instructions below to remove the disk that is placed in the optical storage device: 6. Press the eject button on the drive’s panel and the disk tray will slide out partially. 7. Gently pull the tray out until fully extended.

  • Page 75: Connecting The External Devices

    3-30 Connecting the External Devices The I/O (input/output) ports on the notebook allow you to connect peripheral devices. All devices listed here are for reference only. Connecting the Peripheral Devices Connecting the USB devices This notebook provides USB ports for connecting various USB devices, such as mouse, keyboard, digital camera, webcam, printer, and external optical storage device, ete..
  • Page 76 3-31 Connecting the External Display Devices This notebook provides a VGA port for connecting a larger display with higher resolution. The 15-pin D-Sub VGA port allows users to connect an external monitor or other standard VGA-compatible device (such as a projector) for a great view of the notebook display.
  • Page 77 3-32 HDMI (High Definition Multimedia Interface) is a new interface standard for PCs, displays and consumer electronics devices that supports standard, enhanced and high-definition video, plus multi-channel digital audio on a single cable. Once the display is connected to the notebook, power on the notebook and the external display should respond by default.
  • Page 78 3-33 Connecting the External SATA Hard Disk device The E-SATA Connector allows you to connect an external Serial ATA hard disk device. Users can now utilize shielded cable outside the notebook to take advantage of the benefits the SATA interface brings to storage.

  • Page 79: Connecting The Communication Devices

    3-34 Connecting the Communication Devices Using the LAN The RJ-45 connector of the notebook allows you to connect the LAN (local area network) devices, such as a hub, switch and gateway, to build a network connection. For more instructions or detailed steps on connecting to the LAN, please ask your MIS staff or network manager for help.
  • Page 80 3-35 Using the Modem or Combo Modem The built-in 56Kbps fax/data modem or combo modem (with built-in Bluetooth function) allows you to use a telephone line to communicate with others or to dial-up to connect the Internet. For more instructions or detailed steps on dialing-up through the modem, please consult your MIS staff or Internet service provider (ISP) for help.
  • Page 81 3-36 Using Wireless LAN Connection (optional supported) This notebook is equipped with wireless LAN module which allows users to perform fast data transmission with the standard IEEE 802.11 for wireless LAN. This gives users the mobility to move around within a broad coverage area and still be connected to the network. By using the 64-bit/128-bit Wired Equivalent Privacy (WEP) encryption technology and Wi-Fi Protected Access feature, the optional built-in wirelesses LAN is capable to achieve a more efficient and a more secure solution to the wireless communication.
  • Page 82 3-37 Using Bluetooth Connection (optional supported) This notebook is equipped with Bluetooth module which allows users to connect various Bluetooth-enabled devices to the notebook. Bluetooth provides a way to connect and exchange information between devices such as mobile phones, personal computers, printers, GPS receivers, PDAs, digital cameras, and video game consoles through a secure, globally unlicensed Industrial, Scientific and Medical (ISM) 2.4 GHz short-range radio frequency bandwidth.

  • Page 83: Expresscard Installation

    3-38 ExpressCard Installation This computer provides an ExpressCard slot. The new ExpressCard interface is smaller and faster than PC Card interface. The ExpressCard technology takes advantage of the scalable, high-bandwidth serial PCI Express and USB 2.0 interfaces. The following instruction provides you with a basic installation for the ExpressCard, including how to install and remove it.
  • Page 84 3-39 Removing the ExpressCard Installing the Card Express...

  • Page 85: Components Replacement And Upgrade

    3-40 Components Replacement and Upgrade Please be noticed that the memory, hard disk drive, wireless LAN / Bluetooth module and battery pack preinstalled in the product users purchased may be upgradable or replaceable by user’s request depending on the models users purchased.
  • Page 86 3-41 This notebook is equipped with a high-capacity Li-ion battery pack, and the battery pack is replaceable by users. To replace the battery pack, please refer to the section of Using Battery power for details. This notebook is equipped with a wireless LAN/ Bluetooth module, and the module may be upgradable and replaceable by authorized dealer or service center.
  • Page 87 3-42 To learn more about upgrade limitation, please refer to the specification in the User’s Manual provided. For any further information about the product users purchased, please contact the local dealer. Do not attempt to upgrade or replace any component of the product, if you are not an authorized dealer or service center, since it may cause the warranty void.

  • Page 88: Bios Setup

    CHAPTER 4 BIOS Setup...

  • Page 89: About Bios Setup

    About BIOS Setup When to Use BIOS Setup? You may need to run the BIOS Setup when: An error message appears on the screen during the system booting up and is requested to run SETUP. You want to change the default settings for customized features. You want to reload the default BIOS settings.

  • Page 90: Control Keys

    Control Keys You can use only the keyboard to control the cursor in the BIOS Setup Utility. Press left arrow to select one menu title. Press up arrow to select one item under the menu title. 1) Open the selected item to change setting options. 2) Bring up a sub-menu when available.

  • Page 91: Bios Setup Menu

    BIOS Setup Menu Once you enter the BIOS Setup Utility, the Main Menu will appear on the screen. Select the tags to enter the other menus. The BIOS items and figures shown here are for reference only. Main Menu Show system overview information about BIOS version, CPU features, memory size and setting of system time and date.

  • Page 92: Main Menu

    Main Menu System Date This item allows you to set the system date. [day:month:date:year]. Month Date Year System Time This item allows you to set the system time. The system clock will go on no matter you shut down the PC or get into sleep mode. The time format is [hour:minute:second].
  • Page 93 System Information This item provides the information about the firmware, processor, and system memory.

  • Page 94: Advanced Menu

    Advanced Menu Intel(R) SpeedStep(tm) tech. This item allows you to enable or disable Intel SpeedStep technology. When set to Disabled, the system always operates in a conservative power mode. If you want optimize the processor, set this item to Enabled, so that the processor’s speed will be controlled by the use of your operating system and applications.
  • Page 95 USB Configuration Select this item to enter the sub-menu: -- Legacy USB Support Selecting Enabled allows users to use USB devices, such as mouse, keyboard, or portable disk, in DOS system; or allows users to boot the system by USB device. Setting options: Enabled, Disabled and Auto.

  • Page 96: Boot Menu

    Boot menu Set Boot Priority Configure settings during system boot. Boot Option #1, #2, #3 These items allow you to set the sequence of boot devices where BIOS attempts to load the disk operating system.

  • Page 97: Security Menu

    4-10 Security menu Supervisor Password When this item is selected, a message box shall appear on the screen as below: Enter New Password Type a maximum of eight-digit password and press [Enter]. password entered now will replace any previously set password from CMOS memory.
  • Page 98 4-11 Setup Always To clear a set Supervisor Password/ User Password, just press [Enter] under Supervisor Password/ User Password field when prompted to enter the password. Please note that when Supervisor Password has been cleared, User Password will be cleared as well. A message box pops up confirming password will be disabled.

  • Page 99: Save & Exit Menu

    4-12 Save & Exit menu Exit & Save Changes Save the changes you have made and exit the utility. Exit & Discard Changes Exit the utility without saving the changes you have made. Load Setup Defaults Select this item to load the default settings.

Table of Contents