Care And Maintenance - Danby DUF206E1WDD Owner's Manual

CARE & MAINTENANCE
CLEANING
Ensure the appliance is unplugged before cleaning.
• To clean the inside of the appliance, use a
soft cloth and a solution of one tablespoon of
baking soda to one quart of water or some mild
detergent.
• Wash removable shelves in a mild detergent
solution, then dry and wipe with a soft cloth.
• Clean the outside with a soft, damp cloth and
some mild detergent.
• It is important to keep the area clean where the
door seals against the cabinet. Clean this area
with a soapy cloth. Rinse with a damp cloth and
let dry.
Note: Do not use cleaners containing ammonia or
alcohol on the appliance. Ammonia or alcohol can
damage the appearance of the appliance. Never
use any commercial or abrasive cleaners or sharp
objects on any part of the appliance.
POWER FAILURE
Most power failures are corrected within a few
hours and should not affect the temperature of your
appliance if you minimize the number of times the
door is opened. If the power is going to be off for
a longer period of time, take the proper steps to
protect your contents.
Note: Wait 3 to 5 minutes before attempting
to restart the refrigerator if operation has been
interrupted.
DEFROST
This unit is equipped with an automatic defrost
function and does not require manual defrosting.
Defrost water from the appliance is channeled into
a drip tray located above the compressor. Heat
transfer from the compressor causes the defrost
water to evaporate.
VACATION
• Short vacations: Leave the appliance operating
during vacations of less than three weeks.
• Long vacations: If the appliance will not be used for
several months, remove all items and turn off the
appliance. Clean and dry the interior thoroughly.
To prevent odor and mold growth, leave the door
open slightly, blocking it open if necessary.
MOVING
• Remove all items.
• Securely tape down all shelves.
• Turn the adjustable foot up to the base to avoid
damage.
• Tape the door shut.
• Ensure the appliance stays in the upright position
during transportation. Protect the outside of the
appliance with a blanket.
• If the appliance is placed on its back or side during
transportation, upon reaching the destination, allow
it to remain upright for 6 hours before plugging in
to avoid damage to internal components.
DISPOSAL
This appliance may not be treated as regular
household waste, it should be taken to the appropriate
waste collection point for recycling of electrical
components. For information on local waste collection
points, contact your local waste removal agency or
government offi ce.
ERROR CODES
• E2: Temperature sensor failure.
• E5: Defrosting sensor failure.
• E6: Communication failure.
• E7: Ambient temperature sensor failure.
• E9: High temperature.
To clear all error codes, unplug the appliance and let
it stand undisturbed for 5 minutes, then plug it back
in. If the error code persists, contact consumer care for
further troubleshooting.
6