Hover-1 FORMULA Operation Manual page 17

CHARGING YOUR FORMULA
• Ensure that the charging port is clean and dry.
• Make sure that there is no dust, debris, or dirt inside the port.
• Plug the charger into a grounded wall outlet.
• Connect the charging cable to the power supply (100V-240V; 50
Hz/60 Hz).
• Align and connect the 1-pin charging cable into the charging
port of the Formula (DO NOT FORCE OR BEND THE CHARGING
CABLE AS IT MAY CAUSE THE PRONGS TO BEND OR BREAK).
• The charging indicator light on the charger itself should change to
red, indicating that your go-kart is now being charged.
• When the red indicator light on your charger changes to green,
your go-kart is fully charged.
• After fully charging your go-kart, unplug the charger from your
device and from the wall outlet. A full charge may take up to 6
hours.
• If the go-kart is not used for an extended period of time, you may
need to recharge the battery every 2 months to maintain the battery
life.
15