Advertisement
The wall-mount bracket is optional. If not purchased, it will not be delivered.
Wall-mounted bracket
Gourd-shaped
mounting pegs (2)
2
Installing the Device
1. At least two persons are required to lift and install a 65-inch model, and at least four for
an 86-inch model.
2. Take and place all components gently to prevent them from falling.
1
Prepare the following installation tools:
Measuring tape
Use a pencil or a level instrument to determine the installation position of
2
the bracket and mark the screw holes.
1.
Install the device on a vertical, load-bearing solid wall or concrete wall with more than 20 cm
thickness. To install the device on other types of walls, reinforce the walls and verify the
feasibility before installation. Verification method (for reference only): After installing the
wall-mounted bracket, perform a one-minute load test on it (360 kg for the 86-inch model ).
Ensure that screws are not loose or deformed after the test.
2.
In recessed wall mount scenarios, reserve a 100 mm gap for heat dissipation between the
display edge and recessed wall edge.
Wall mount bracket box (optional)
Expansion bolts (6)
Gourd-shaped
supporting screws (2)
Pencil
Electric screwdriver
(M8*60mm)
Hammer drill
Hex key
(M6*140mm)
Hammer
Advertisement
