Advertisement
Wearing rubber gloves and goggles, spray
UNOX
SPRAY&RINSE on the steel parts. Do not
spray the product on the
suction pad as this may cause damage over
time.
■ Leave the detergent to act for at least 10
minutes.
■ Remove softened residue with a soft
sponge. Do not use abrasive,
sharp or pointy tools or cloths (e.g. abrasive
sponges, scrapers, steel
brushes, etc.).
■ Rinse thoroughly with a damp cloth to
remove any traces of detergent. Dry with a
clean cloth or kitchen roll.
19
Advertisement
