Table of Contents
Advertisement
en Troubleshooting
14 Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshoot-
ing information before contacting after-sales service. This will avoid unneces-
sary costs.
WARNING
Risk of electric shock!
Incorrect repairs are dangerous.
Repairs to the appliance should only be carried out by trained specialist
▶
staff.
Only use genuine spare parts when repairing the appliance.
▶
If the power cord of this appliance is damaged, it must be replaced by the
▶
manufacturer, the manufacturer's Customer Service or a similarly qualified
person in order to prevent any risk.
Fault
The appliance is not
cooling, the displays
and lighting are lit.
The LED lighting does
not work.
or
appears in the
temperature display.
The temperature dif-
fers greatly from the
setting.
24
Cause and troubleshooting
Showroom mode is switched on.
Carry out the appliance self-test. → Page 26
▶
a Once the appliance self-test has ended, the appli-
ance switches to normal operation.
Different causes are possible.
Call customer service.
▶
The customer service number can be found in the
enclosed customer service directory.
The electronics have detected a fault.
Switch off the appliance. → Page 16
1.
Disconnect the appliance from the mains.
2.
Unplug the appliance from the mains or switch off
the circuit breaker in the fuse box.
Reconnect the appliance after five minutes.
3.
If the message still appears on the display, call cus-
4.
tomer service.
The customer service number can be found in the
enclosed customer service directory.
Different causes are possible.
Switch off the appliance. → Page 16
1.
Switch the appliance back on after five minutes.
2.
→ Page 15
If the temperature is too warm, check the temper-
‒
ature again after a couple of hours.
If the temperature is too cold, check the temper-
‒
ature again on the following day.
Advertisement
Table of Contents
