Table of Contents
Advertisement
Playing with Different Tones
To adjust the metronome volume
You can perform the following procedure at any time,
regardless of whether or not the metronome is
sounding.
1.
While holding down the FUNCTION button,
use the Metronome Volume keys to specify a
volume value in the range of 0 to 42.
• For details about using the keyboard keys for
settings, see "Keyboard Keys Used for Configuring
Settings" on page EN-20.
• Each press of the + and – key raises or lowers the
metronome volume value by 1.
NOTE
• To return to the initial default setting, press + and –
at the same time.
EN-10
Splitting the Keyboard for
Duet Play
You can split the keyboard in the center so the left and
right sides have the same range. The left outer pedal is
the left side damper pedal, while the right outer pedal
is the right side damper pedal.
Keyboard
Left keyboard
C3
C4
C5
(middle C)
Pedals
Left side damper pedal
Left and right side damper pedal
NOTE
• Only the damper pedal for the right side keyboard
supports half-pedal operations.
1.
Select the piano tone you want to use for the
duet.
Example: GRAND PIANO 1 (BRIGHT)
2.
To cycle between the Duet Mode settings
below, hold down the FUNCTION button and
press the Duet Mode key.
Off
On
Pan: Outputs left side keyboard tone from the left
speaker and right side keyboard tone from the
right speaker.
IMPORTANT!
• The Octave Shift and Transpose settings cannot be
changed while On or Pan is selected for the Duet
Mode setting.
• While Pan is selected for the Duet Mode settings,
the Hall Simulator, Reverb, and Chorus settings
cannot be changed.
Split point
Right keyboard
C6
C3
C4
C5
(middle C)
Right side damper pedal
C6
Advertisement
Table of Contents
