Using The Metronome - Casio Celviano AP-265 User Manual

Using the Metronome

1.
Press the METRONOME button.
• This starts the metronome.
• The lamp flashes with each beat.
2.
While holding down the FUNCTION button,
press the METRONOME BEAT keyboard
key.
• Keep the FUNCTION button depressed as you
advance to step 3.
3.
Hold down the FUNCTION button and press
the BEAT keyboard key (0 to 9) that
corresponds to the beat you want to specify.
• You can specify a beat value in the range of 0 to 9
(beats per measure). A chime will sound on the first
beat of each measure, and clicks will sound for the
remaining beats. Specifying 0 plays a straight click,
without any chime. This setting lets you practice with
a steady beat.
4.
Release the FUNCTION button and then hold
it down again as you press the
METRONOME TEMPO keyboard key.
• Keep the FUNCTION button depressed as you
advance to step 5.
5.
While holding down the FUNCTION button,
use the TEMPO keys to specify a tempo
value in the range of 20 to 255 beats per
minute.
• Each press of the + or – key raises or lowers the
tempo value by 1.
• You can also use the tempo value input keys (0 to 9)
to enter a specific tempo value.
• Input three digits as the tempo value.
Example: To set a tempo of 20, press keys 0, 2, and
then 0.
6.
Press the METRONOME button to turn off
the metronome.
NOTE
• If you used the numeric input (0 to 9) keyboard keys
to input beat and/or tempo values and the values
are within the allowable setting ranges, the Digital
Piano will emit a high pitch beep when you release
the FUNCTION button. If a value is outside the
allowable range, a low-pitch sound will be emitted.
• In step 5 of the above procedure, pressing the + and
– keys at the same time will set the tempo of the
Concert Play lesson song or Music Library song (in
the case of a recorded song, the tempo when the
song was recorded) that was last selected on the
Digital Piano.
Playing with Different Tones
EN-9