M-Audio FireWire Solo User Manual page 7

Once the installer has finished copying the files, you will see the Installation Complete screen. You will then be prompted to shut down your
computer.
After the computer has been powered off, connect the FireWire SOLO to an available FireWire port on the computer and turn the FireWire SOLO
power on. Once the FireWire SOLO is connected and powered, turn on your computer. Once Windows has fully loaded, the New Hardware
Wizard will open. Choose the default selection, "Install the software automatically." Click "Next." Windows will locate and install the FireWire SOLO
Bootloader files.
Choose the default selection, "Install the software automatically." Click Next. Windows will locate and install the FireWire Solo Bootloader files.
Once the Bootloader installation is complete, Windows will locate the FireWire Solo driver files. The New Hardware Wizard will run a second time
to install the FireWire Solo driver software.
6