Let's Get Started; How To Scan - C-Pen READER 2 Quick Start Manual

Let's get started!

1. Press and hold the power button for 3 seconds, then
release it. If the display doesn't light up, charge the
battery for about 30 minutes and then give it a sec-
ond try.
2. At first use, a guide will help you set up your C-Pen
Reader 2. This includes settings for
• Talking Menu (reads menu out loud)
• Menu language (user interface language)
• Scan language (language of text to scan)
• Voice (as some languages supports more than
one accent)
• Preferred dictionary
• Left-/Right-handed (hand holding the pen)
After this, you reach the menu. Choose the function you
want, for example C-Pen Reader 2, using the 4-way Nav
button and the OK-button in the middle. Scan and listen
to the text being read aloud to you. Press the OK button to
listen to the text as many times as you want. Or press the
MENU button to access options such as reading speed,
volume, reading pauses, reading language and dictio-
naries. If you like, you can connect a pair of earphones so
that only you can hear the C-Pen Reader 2.

How to scan

Hold the C-Pen Reader 2 almost straight up. Make sure
that you do not press any buttons during a scan. The pen
scans one (1) text line at a time and this text line shall be
centred in between the two white nibs in the front of the
2
EN