Table of Contents
Advertisement
Quick Links
ECO-Jack
Furniture Mover
www.hts-direct.com
Please read and comply with this user
manual and the safety warnings prior
to the use of these furniture mover
to protect you and others.
This equipment must not be used
to carry or lift personnel.
Thank you
for choosing an ECO-Jack DUAL HT
Furniture Mover. A quality product
from HTS.
The ECO-Jack DUAL HT enables you to
lift and move heavy loads, machines,
and other items safely.
ECO-Jack DUAL HT600 - a mecanical furniture mover
with a load moving capacity of up to 600kg
ECO-Jack DUAL HT1800 - a hydraulic furniture mover
with a load moving capacity of up to 1.800kg
above are supplied with ratched strapes
Table of contents:
Introduction / Product details
Quality tools by HTS ... the load moving experts
®
DUAL HT
page 1
page 2
page 3
page 3
page 4
U s e r m a n u a l
WARNING
IMPROPER USE OF ECO-JACK
CAN RESULT IN SERIOUS INJURY
TO AVOID INJURY: - Always make sure that the load is fully supported by the claw or top plate
- Jack to rest on soild ground in VERTICAL position - Jack only with the pivoting feet facing towards
the load - Never exceed maximum lifting capacity - No side load permissible - Keep body parts from
beneath the load and all moving parts at all times - Bystanders should keep clear of the load (to a
min. of 1,5 times the highest point of the load) - Support the load with suitable supports - Lift on fixed
parts of the load - Do not use the jack if it is damaged or without a valid inspection certificate - Always
use recommended lubricants - Always use genuine HTS replacement parts - Periodically check
lubricant level - Read the user manual provided with the jack and follow all instructions before
operation - The user is responsible for condition of all warning labels - These instructions are guide-
lines and you should always refer to the operating manual if in doubt.
In all circumstances consider "S A F E T Y F I R S T "
© HTS GmbH, Fellbach, Version 10.16
FURNITURE MOVERS
®
© 2012 HTS
GmbH
English
1
Advertisement
Table of Contents
Related Manuals for HTS ECO-JackDUAL HT600
Summary of Contents for HTS ECO-JackDUAL HT600
- Page 1 This equipment must not be used parts of the load - Do not use the jack if it is damaged or without a valid inspection certificate - Always use recommended lubricants - Always use genuine HTS replacement parts - Periodically check to carry or lift personnel.
- Page 2 Warranty: The standard warranty is 6 month. Any changes on the product will result in loosing the war- ranty, except for changes with prior permission of HTS. Repair and Service For any service or rapair please contact us for an offer.
- Page 3 Warnings The above described safety valves are only working in the lifting process. Do not place additional load on the system if lifted. If you need a higher capacity HTS can supply ECO-Jack DUAL HT with higher capacities. During the lowering process make sure that the personell which is lowering the load only touches the lever to do so not anything else.
- Page 4 Please supply with your order the correct part number, quantity required and description as well as the type of the jack and serial number. If a repair has to be carried out by HTS please send only the defective parts - Thank you.
Need help?
Do you have a question about the ECO-JackDUAL HT600 and is the answer not in the manual?
Questions and answers