Programming The Code; Keypad Sounds - no-flame 57114 Instruction Manual

Programming the code

1. Open the door and press the red reset
button on the inside of the door near the
hinge. Two beeps will be heard and the
yellow indicator light will come on.
2. Enter the desired new 3-8 digit code and
confi rm the new code by pressing the *
button.
The yellow indicator light fl ashes 3 times
and 3 beeps will sound. Write the new
code down immediately so that you don't
forget it.
If the red indicator light fl ashes 5 times
and 5 beeps are heard, there has been an
error and you will need to start again.
3. Do not lock the door before you have
ensured that your new code functions
correctly!

Keypad sounds

• You can turn off the keypad sounds by
entering * 6 3 3
• You can turn on the keypad sounds by
entering * 6 6
8
Securing the safety deposit box
In order to reduce the risk of the safety
deposit box and its contents being stolen, it
can be bolted securely to the fl oor using the
expansion bolts provided.
Mount the safety deposit box in a place
where it is not immediately visible to
burglars.
Place the shelf at the required height inside
the safety deposit box.