Table of Contents
Advertisement
ber method. Remember, the method of saving your present position and
the cursor's position is identical.
Edit Lat/Lon
The AirMap lets you enter any latitude/longitude
using the keyboard and save it under any waypoint
number, from 1 to 250. You can also change any
waypoint's position using this method. To do this,
first select the waypoint number. When you select
the USER WPTs menu, the GPS receiver places
you at the last-used waypoint number. If you want
to save the location under a different waypoint num-
ber, press the up arrow key until the black box is on the "WPT #" label.
Now press the left or right arrow keys until the desired waypoint number
appears. In this example, we moved it to waypoint number twelve.
When the desired waypoint number is showing,
highlight the "EDIT LAT/LON" label, then press the
right arrow key. The screen shown at right appears.
To enter the latitude, simply move the black box
using the right and left arrow keys, then press the
up or down arrow keys until the desired number
appears. If you make a mistake, simply move the
black box back to the number you need to change,
and change it. If you want to change the entire lati-
tude number, press the WPT key to erase it and
start over. To exit completely out of this screen without saving the posi-
tion, press the EXIT key.
When the latitude is the way you want it, press the
right arrow key to move the black box to the longi-
tude. Now enter the longitude.
When you're ready to save this position and return
to the waypoint screen, press the ENT key. The
location you entered shows at the bottom of the
screen under the waypoint number you selected.
WAYPOINT NAMES
The AirMap lets you assign a name to each waypoint. The name can have
up to twelve characters. To name a waypoint, first select the waypoint
number that you wish to name. (Note: A waypoint must have a position
stored before you can name it.) Now highlight the "EDIT NAME" label and
48
Advertisement
Table of Contents
