Lowrance iWAY 250C Mounting Instructions page 3

the cradle, push back on the unit until it snaps into place. You may
need to lift the release tab slightly to engage unit in cradle.
First, engage
bottom edge
of GPS unit
to bottom of
cradle as
shown here.
Another option is to place the GPS unit in the cradle before attaching
the suction cup and arm to the mounting surface. To dismount the unit
from the cradle, push the release tab up slightly then lift the iWAY
from the cradle. To remove the suction cup base, disengage the locking
lever and pull on the suction release tab to break the vacuum seal.
If the suction cup mount has problems staying on, clean the mounting
surface and the suction cup with alcohol then reinstall. Moistening the
suction cup may help adhesion in some cases.
Adhesive Mounting Plate
In some automobiles a typical windshield mount may be difficult or un-
desirable. The flat self-adhesive mounting plate allows you to mount
the unit somewhere else, such as on the dashboard or center console.
Remember, some states restrict mounting any electronic device to a
dash or windshield. Be sure to check your local laws before using any
mounting device.
Steps for attaching unit to mount.
3
Then push
back on
unit until it
snaps into
place. You
may need
to lift the
release tab
slightly to
engage
unit.