Table of Contents
Advertisement
GLOBALMAP SPORT™ TRANSMITTING NMEA DATA
NDC-1 TO GLOBALMAP SPORT™
GLOBALMAP SPORT™
WIRES
WHITE WIRE
RED WIRE
TO +12V
SHIELD WIRE
GROUND WIRES
OTHER DEVICE'S
WIRES
OTHER
DEVICE'S
RECEIVE
DATA WIRE
(Note: Connecting power to the GlobalMap
Sport™ through the NDC cable as shown in
the diagrams is optional. However, the shield
wire must still be connected to ground.)
Once the cables are wired, turn the GlobalMap
Sport™ on, press the menu key, and select
the NMEA / DGPS menu. A screen similar to
the one at right appears.
NMEA
To turn the NMEA output on, move the black box to the "NMEA 0183
OUTPUT" menu, then press the right arrow key. If your other equipment
works, then no setup will need to be performed. If your other equipment
doesn't recognize the NMEA data being sent by the GlobalMap Sport™
and the wiring is correct, then you may need to change the NMEA or the
serial communication settings.
TO ANOTHER DEVICE
OTHER
DEVICE
38
12-VOLT
BATTERY
(IF NEEDED)
Hide quick links:
Advertisement
Table of Contents
