Special Playback; Picture Search; Still Image; Vertical Lock Control - Lorex SG850 Owner's Manual

14” combo
Table of Contents

Advertisement

Special Playback

Picture Search

1
Press the FF (or REW) button, during normal
• During picture search,
playback.
noise (horizontal bars) will
appear in the picture.
• The image can be seen while the tape is advanced (or
rewound) at high speed.
• The sound is muted.
2
To return to normal playback, press the PLAY button.

Still Image

• If still mode continues for
1
Press the PAUSE/STILL button, during normal
5 minutes or more, the
playback.
VCR will go into stop
mode to avoid damaging
• A still image can be viewed.
the tape.
2
To return to normal playback, press the PLAY button.
• If the image is unstable
(rolling vertically), adjust
• With each press of the PAUSE/STILL button, the still
the tracking control to
image is advanced one image (frame).
correct.

Vertical Lock Control

During still image mode,
1
Press the TRACKING + button to reduce the vertical
rolling of the image.
2
If it cannot be corrected, press the TRACKING - button.

Slow

1
With each press of the FF button, during still image
mode, the slow speed will change as indicated below.
1/15times
direction)
2
With each press of the REW button, during still
image mode, the slow speed will change as indicated
below. 1/15times
(backward direction)
3
To return to normal playback, press the PLAY button.

Recording Check

• During recording check
During recording, press the REC CHECK button.
operations, recording is
suspended momentarily.
• The tape will be rewound for about 5 seconds and slow
play mode will be performed. The VCR will then return
to the previous recording mode.
32
1/20times
1/30times (forward
1/10times
1/5times
Security 14" Monitor Combination

Alarm Search

1
Press the Menu button two times to display the VCR
initial menu.
2
Press the SHIFT
SELECT, then press the SHIFT
the TAPE SEARCH SELECT menu.
3
Move the hand mark(
Alarm Search mode as you want to search.
4
Press the SET -(or +) button to enter the number of
alarm marks you want to search, press the SHIFT
button to search forward or in reverse.
• The display returns to the normal screen.
• The VCR will locate the desired alarm recording and
begin playback.
Security 14" Monitor Combination
Special Playback
button to select TAPE SEARCH
button to display
[TAPE SEARCH SELECT]
ALARM SEARCH
FF
: - -
REW
: - -
INDEX SEARCH
FF
REW
GO TO ZERO SEARCH
) to FF or REW in the
33

Advertisement

Table of Contents
loading

Table of Contents