Advertisement
QUICK START GUIDE
We are delighted to introduce TheGigRig G3 pedalboard switching system.
We designed G3 from the ground up, obsessively testing and retesting every aspect of its design to ensure we
delivered the most robust, fully featured, tonally transparent switching system in the world.
G3 is an expression of our passion: we compromised on nothing.
-
Daniel Steinhardt
We want you to jump right in, so here is what you need to know to get started.
BACK PANEL CONNECTIONS
TOP PANEL
CONNECTIONS
To connect your effects to the back panel of G3:
1. Connect G3 FX Loop SEND to FX Pedal Input.
2. Connect FX Pedal OUTPUT to G3 Loop Return.
3. Connect your amp(s) PLEASE NOTE if you are only using one amplifier/DAW you MUST use OUT1 as this is
your earth/ground. Connect to your second amplifier or channel/DAW using OUT2 as this is isolated and
phase reversible.
4. Connect your tuner to the TUNER/AUX output.
5. Connect any MIDI enabled pedals using the MIDI INPUT/OUTPUT.
6. Connect your Remote Switch controllable devices (i.e. Amp channel, Remote Loopy 2, Tap Tempo) using G3's
REMOTE SWITCH sockets.
7. Connect your power to G3. We strongly recommend using TheGigRig Generator which is supplied with your
G3.
G3 Quickstart Guide V.1 / ©The GigRig Ltd 2020
Advertisement
