Overview: DisplayPoint Kiosk PRO GRADE 400 NIT LED VANDAL RESISTANT 10 POINT OPTICALLY CLEAR CAPACITIVE TOUCH SCREEN BLACK/WHITE EDGING WITH BLACK/ WHITE ACRYLIC FRONT WEIGHTED STEEL BASE WIFI ANTENNA KEY TO UNLOCK BACK ACCESS PANEL POWER INPUT 110 VOLT &...
Unboxing: 1. Inspect the box for damage (if damaged contact SeePoint). 2. On a level surface, cut the strapping *NEVER MOVE A UNIT WHILE ON A PALLET ONCE THE STRAPPING HAS BEEN REMOVED, IT WILL FALL OVER AND BECOME DAMAGED!*...
Setup: Turn on the power switch, and your unit should boot into seepoint desktop. Go ahead and connect to your WiFi. • If you ordered KioWare please follow kioware guide. • If your unit does not come with Preinstalled computer please follow PC installation guide.
1234 for Network window. Go ahead and connect to your WiFi network. 2619 to exit KioWare. This will take you to the Windows login Screen. From Windows login screen you can select User: Admin/SeePoint to login to windows desktop or back to KioskUser. Password: seepoint...
PC Installation Guide: If your unit does not come with a PC, you can connect your pc as shown below. 1. Open the back access panel with the key provided. 2. Inside there are four connections. Connect the port as needed. •...
Cleaning the Screen: 1. Always wipe the kiosk with a microfiber cloth 2. Spray the cleaning solution on the towel 3. Wipe the towel on the glass to clean *Never spray the kiosk!*...
Contact Us: IF YOU HAVE ANY QUESTION PLEASE REACH US AT: (310) 725 - 9660 SeePoint, LLC. www.SeePoint.com support@seepoint.com 2619 Manhattan Beach Blvd. Redondo Beach, CA 90278...
Need help?
Do you have a question about the DisplayPoint and is the answer not in the manual?
Questions and answers