1. Manuals
  2. Brands
  3. Seepoint Manuals
  4. Digital Signage
  5. VantagePoint Plus
  6. Quick start manual

Seepoint VantagePoint Plus Quick Start Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Quick Start Guide
VantagePoint Plus®

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VantagePoint Plus and is the answer not in the manual?

Questions and answers

Related Manuals for Seepoint VantagePoint Plus

Summary of Contents for Seepoint VantagePoint Plus

  • Page 1 Quick Start Guide VantagePoint Plus®...

  • Page 2: Table Of Contents

    Contents: Overview: Pivoting/Angling the Head: Power and Network Cables: Network: Loading the paper roll: Cleaning the Touch Screens: Removing Bezel: KioWare guide: Contact us:...

  • Page 3: Overview

    Overview: VantagePoint Plus LCD TOUCH SCREEN KEYBOARD & MOUSE LOCK TO OPEN THE FRONT COVER KPM216HIII ETH PRINTER ETHERNET PORT, POWER SWITCH & POWER INPUT 110 VOLT...

  • Page 4: Pivoting/Angling The Head

    Pivoting/Angling the Head: The angle of the screen may be changed by loosening/tightening the secure bolts with the provided allen wrench. Do NOT over loosen or remove bolts.

  • Page 5: Power And Network Cables

    Power and Network Cables: 1. Connect the female end of the power cord into socket located at the rear bottom of the base. Plug the male end of the power cord into a standard grounded electrical outlet. A standard RJ-45 network connection is also located on the base of the kiosk.

  • Page 6: Network

    Network: 1. Once you turned on power switch, your unit should boot into seepoint desktop. 2. If you plugged in the Ethernet cable, your kiosk should be online. 3. If your kiosk comes with WiFi, Go ahead and connect to your WiFi.

  • Page 7: Loading The Paper Roll

    Loading the paper roll: To Load a paper roll: 1. Open the front cover by using the key provided. 2. Slide the printer tray outwards as shown below.
  • Page 8 Loading the paper roll: 3. To change the paper proceed as follows. At every change of paper, check inside the device to locate and remove and sraps of paper. 4. Adjust the paper width. Paper width may be adjusted from 194 mm to 216 mm by moving the adjustable cursors as shown in the follwing figure.
  • Page 9 Loading the paper roll: 6. Insert the paper into the paper input opening and wait until the paper is automatically loaded and cut. Once the paper is loaded, slide back the printer tray to its position and close the front cover of the kiosk.

  • Page 10: Cleaning The Touch Screens

    Cleaning the Touch Screens: Never spray the cleaner directly onto the screen as seepage and cloudiness may result. Spray the cleaner onto a soft, lint free cloth. Wipe the screen with the cloth. Household cleaners such as Isopropyl Alcohol, Windex, or any ammonia based product may be used.

  • Page 11: Removing Bezel

    Removing Bezel: Steps: 1. This procedure is for a more extensive cleaning and should only be performed when touch screen is not functioning. First angle the screen flat and tighten the side pivots. Then, from below the monitor head remove the 6 button head screws that retain the bezel onto the back mount.

  • Page 12: Kioware Guide

    1234 for Network window. Go ahead and connect to your WiFi network. 2619 to exit KioWare. This will take you to the Windows login Screen. From Windows login screen you can select User: Admin/SeePoint to login to windows desktop or back to KioskUser. Password: seepoint...

  • Page 13: Contact Us

    Contact us: IF YOU HAVE ANY QUESTION PLEASE REACH US AT: (310) 725 - 9660 SeePoint, LLC. www.SeePoint.com support@seepoint.com 2619 Manhattan Beach Blvd. Redondo Beach, CA 90278...

Table of Contents