Advertisement
Mount the Instrument
The Keithley 6487 should be installed using one of the provided rack mount kits.
The half rack mount kit contains mounting ears, panel, handles (optional), and screws that adapt the
front panel to fit into an 88.9 mm (3.5 in) tall full rack space. Refer to Figure 4 for installation details.
The dual half rack mount kit contains inner and outer mounting ears, handles (optional), and screws that
adapt the front panel to fit into an 88.9 mm (3.5 in) tall full rack space beside an existing instrument.
Refer to Figure 5 for installation details.
NOTE: Ensure that there is a 25 mm (1 in) clearance on both sides of the instrument after
rack mounting.
Figure 5: Half rack mounting
Figure 6: Dual half rack mounting
Revision 1.1
P/N 119-845
6
Advertisement
