Page 1
THE WEB MODULE ecoNET300 REMOTE CONTROL OF BOILER CONTROLLERS www.econet24.com ecoNET.apk ecoNET.app OPERATION AND INSTALLATION MANUAL ISSUE: 1.1_EN APPLIES TO THE BOILER CONTROLLERS, SERIES: ecoMAX850, ecoMAX860, ecoMAX920 04-2020...
CONTENS OF TABLE INFORMATION ABOUT DOCUMENTATION ..4 APPLIED SYMBOLS ..........4 4. DIRECTIVE WEEE 2012/19/UE ........4 GENERAL INFORMATIONS ........4 SAFETY INFORMATION........4 COOPERATION WITH CONTROLLERS ....5 CONNECTION TO THE CONTROLLER ....5 MAX850P2 ...... 5 ONNECTION WITH ECO MAX860P3 ......
Verify if controller software is adapted to • do not dispose of the product with other cooperate with ecoNET300 internet module. unsorted waste, • do not burn the product. By adhering obligations of waste electrical...
In case of some types of controllers necessary appropriate adapter. The ecoLINK2 interface and adapter are a part of the ecoNET300 set. Standard RJ11 telephone cable with an option of connecting wires and a method of connecting into the divider.
7. Connection with Internet The ecoNET300 requires constant access to a wire LAN or wireless Wi-Fi network in a place of installation of the controller. RJ45 Ethernet Port mini USB Port 3G USB Port Mode Switch Connection with ecoMAX860P3 case...
Page 7
Select SSID in Network Settings. It is a www.econet24.com name of the local wireless network which has external server. to be the same for all devices working in this After the power is on, ecoNET300 requires network (SSID can be, e.g.: myWiFi). app. minute order load operational system.
ENTER/OK. internet module, Filling data correctly results in ecoNET300 • the internet module should be connected connected to a Wi-Fi network. to the Internet and be logged into the In the MENU →...
• Remote access to the controller by the Information about controller service and the producer – enables to additional modules, possibility change the address of controller access and edit controller parameters via Device installation. settings the service and the producer. Option to read parameters from the •...
Just click in the edit box and the value change window will appear, where set the new parameter value with the slider and confirm with the Save button. Exit with modification without saving a new setting is possible by clicking on the symbol.
• reduction preset temperature ecoNET300 module. It displays information heating circuits. concerning a new software version. All the Turn on the schedule by selecting On for the user needs to do is to press Update button.
In case the user has forgotten his password for logging in the Internet module, it is possible to restore default data with the use of a button on the ecoNET300 housing. Default username password (user: admin, password: admin) can be restored with the use of WPS/RESET button located near indicators on the ecoNET300 housing.
12. GNU General Public License Notice 1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice This product includes software code developed by third parties,including and disclaimer of warranty;...
Page 14
PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR 5. You are not required to accept this License, since you have not signed DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR it. However, nothing else grants you permission to modify or distribute the CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR Program or its derivative works.
Need help?
Do you have a question about the ecoNET300 and is the answer not in the manual?
Questions and answers