Delta RS2200 Assembly Instructions

Single Bike
Ceiling Hoist
Assembly instructions Assembly instructions
Parts
A A
x1 — Single Pulley (Back)
B B
x1 — Double Pulley (Front)
C C
x7 — Screws
D D
x2 — Pulley Hooks
E E
x1 — Cord Cleat
F F
x1 — Cord
IMPORTANT IMPORTANT
IT IS RECOMMENDED THIS ITEM BE INSTALLED IT IS RECOMMENDED THIS ITEM BE INSTALLED
BY A COMPETENT PROFESSIONAL BY A COMPETENT PROFESSIONAL
Tool (s) Required
Phillips Head
Screwdriver
WARNING
NEVER EXCEED MAXIMUM TOTAL WEIGHT LIMIT OF 100 LBS (46 Kgs) NEVER EXCEED MAXIMUM TOTAL WEIGHT LIMIT OF 100 LBS (46 Kgs)
BEFORE USE THOROUGHLY TEST THE HOIST FULLY WEIGHTED WITH THE ITEM INTENDED TO BE STORED, BEFORE USE THOROUGHLY TEST THE HOIST FULLY WEIGHTED WITH THE ITEM INTENDED TO BE STORED,
ENSURING THE UNIT HAS BEEN INSTALLED SECURELY AND IS FUNCTIONING PROPERLY. ENSURING THE UNIT HAS BEEN INSTALLED SECURELY AND IS FUNCTIONING PROPERLY.
MAKE SURE THAT THERE ARE NO OBSTRUCTIONS TO RESTRICT OPERATION OF THE HOIST ASSEMBLY AS MAKE SURE THAT THERE ARE NO OBSTRUCTIONS TO RESTRICT OPERATION OF THE HOIST ASSEMBLY AS
WELL AS THE HOISTED ITEM; FOR EXAMPLE: VEHICLES, GARAGE DOORS AND OTHER EQUIPMENT. WELL AS THE HOISTED ITEM; FOR EXAMPLE: VEHICLES, GARAGE DOORS AND OTHER EQUIPMENT.
DO NOT CUT THE CORD. DO NOT CUT THE CORD.
IMPROPER INSTALLATION OR USE CAN RESULT IN PERSONAL INJURY AND/OR DAMAGE TO PROPERTY. IMPROPER INSTALLATION OR USE CAN RESULT IN PERSONAL INJURY AND/OR DAMAGE TO PROPERTY.
RS2200 RS2200
Drill
Assembly video
Visit designbydelta.com/downloads
A A
C C
Stud Locator
1/8" drill bit
(3mm)
Tape Measure
B B
F F
D D
E E