Nova 8353-R How To Install

INSTALL YOUR
LOCKING RAISED TOILET SEAT
WITH ARMS
Item # 8353/8353-R
Capacity not to exceed 300 lb

Pre-Installation Instructions

1
Make sure the toilet is clean and sanitized. Lift
up toilet seat and lid.
NOTE: You may also need to remove the entire
seat and lid from the toilet (varies depending
on the size of the toilet).

Installation Instructions

1
To install arms, depress the brass push buttons
and insert the arms into the telescoping tubes
on the sides of the seat. Push down until brass
buttons engage and lock into the toilet seat.
Arms should curve outward, away from center
of toilet.
2
Set the Raised Toilet Seat onto the
toilet. Ensure inner portion of the
anchor insert of the Raised Toilet
Seat is placed inside the toilet
bowl and sets against the back of
the toilet rim.
4
Tighten the clamp on the unit by
turning the gray knob in the front
clockwise until securely locked
onto the toilet.
NOTE: DO NOT overtighten the
knob. This may result in the plas-
tic clamp breaking.
HOW TO
WHAT'S IN THE BOX
a. (1) Locking Raised Toilet Seat
Assembly
b. (2) Arms
3
The square clamp on the bottom
of the Raised Toilet Seat should
be facing toward the inside of the
toilet's front rim. The clamp may
have to be loosened, by turning
the gray knob counterclockwise,
to fit inside the toilet.
5
Pull up on the Raised Toilet Seat
to make sure it is securely locked
onto the toilet. Always apply even
pressure around the Raised Toilet
Seat. To remove arms depress the
brass push buttons and pull the
arms away from the toilet seat.
NO tools required.
Quick installation.
Easy to follow
step-by-step
instructions
a.
b.
Revised: August 15, 2018