Display Modes; Initial Loading Sequence - Lorex L104161 Instruction Manual

Display Modes

Display Modes

Initial Loading Sequence

The unit will automatically begin loading when power is
connected to the DVR.
1. The DVR will perform a Firmware check.
During the loading sequence, the version of
Hardware and Mode (NTSC or PAL) will be
displayed.
2. Once the Firmware check is completed, the
DVR will check the Hard Drive. If a new drive
has been installed, the system will prompt to
format the new drive.
3. The unit will initially load to a split screen view,
displaying all 4 cameras with Camera Names
and the Date and Time. If a camera cannot be
displayed, a V-LOSS message appears instead
of an image.
NOTE: If a new HARD DRIVE is detected, the
system will prompt you to FORMAT the drive. If you
do not choose to format the HARD DRIVE, the drive
will not be detected by the system.
If you choose to FORMAT a drive in this way, the
drive will no longer be readable by a regular PC
without using the VIEWER software included on the
CD provided with this unit
Press the ◄ & ► Keys to format, or press the
(Menu) button to cancel.
14
1
DVR V1-03 EN
NTSC
2
Checking HDD ...
ST3500630AV
Standalone
3
2007/10/10 01:02:03
CH1 CH2
CH3 CH4
Checking HDD ...
HDD NEEDS TO FORMAT
ALL DATA WILL BE LOST
(◄►) FORMAT / ( ) CANCEL
V-LOSS