Table of Contents
Advertisement
On-Screen Display
The following makeup the on-screen display of the system:
•
Recording: Indicates active recording on each channel (manual and scheduled
recording).
•
Motion: Indicates motion recording or motion detected on active channel.
•
Motion Alarm: Indicates motion has been detected on active channel.
Note: Sensitivity and Alarm Duration must be enabled for the selected channel.
•
Video Loss: Indicates that a camera is not connected or has been disconnected.
• Date / Time bar: The date appears as yyyy/mm/dd; the time appears as hh/mm/ss.
Note: You cannot change the date and time format.
2008/11/20 10:32:30
Display Modes
The system can display channels in full-screen single channel and quad split-screen. It also
features an Auto Sequence Mode, where all four channels are displayed in sequence in
full-screen.
Note: By default, the system loads the quad split-screen at startup.
To change display modes:
1
1. Press buttons
full-screen.
4
2. Press the
button to return to Quad split-screen.
CH1
Single Channel Full-Screen
Figure 6.1 Display modes
2
3
4
on the remote control to view each respective channel in
2008/11/20 10:32:30
CH1
CH3
Quad Split-Screen
Starting the System
CH2
CH4
2008/11/20 10:32:30
9
Advertisement
Table of Contents
