Dahua Technology DHI-ARD323-W2 User Manual
Dahua Technology DHI-ARD323-W2 User Manual

Dahua Technology DHI-ARD323-W2 User Manual

Wireless door detector

Advertisement

Quick Links

Wireless Door Detector
User's Manual
ZHEJIANG DAHUA VISION TECHNOLOGY CO.LTD.
V1.1.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DHI-ARD323-W2 and is the answer not in the manual?

Questions and answers

Summary of Contents for Dahua Technology DHI-ARD323-W2

  • Page 1 Wireless Door Detector User's Manual ZHEJIANG DAHUA VISION TECHNOLOGY CO.LTD. V1.1.0...
  • Page 2: Foreword

    User's Manual Foreword General This manual introduces the installation, functions and operations of the Wireless Door Detector (hereinafter referred to as the "door detector"). Read carefully before using the device, and keep the manual safe for future reference. Safety Instructions The following signal words might appear in the manual.
  • Page 3 User's Manual compliance with the manual. ● The manual will be updated according to the latest laws and regulations of related jurisdictions. For detailed information, see the paper user’s manual, use our CD-ROM, scan the QR code or visit our official website. The manual is for reference only. Slight differences might be found between the electronic version and the paper version.
  • Page 4: Important Safeguards And Warnings

    User's Manual Important Safeguards and Warnings This section introduces content covering the proper handling of the door detector, hazard prevention, and prevention of property damage. Read carefully before using the door detector, and comply with the guidelines when using it. Operation Requirements ●...
  • Page 5: Table Of Contents

    User's Manual Table of Contents Foreword ........................................I Important Safeguards and Warnings ............................III 1 Introduction ......................................1 1.1 Overview ......................................1 1.2 Technical Specifications ................................. 1 1.3 Detection Performance ................................3 2 Checklist ........................................4 3 Design ......................................... 5 3.1 Appearance ....................................5 3.2 Dimensions ....................................
  • Page 6: Introduction

    Button 1 × power button Tamper Alarm Remote Update Cloud update Function Search Signal strength detection Low Battery Alarm DHI-ARD323-W2 (868): DHI-ARD323-W2: Carrier Frequency 868.0 MHz–868.6 MHz 433.1 MHz–434.6 MHz DHI-ARD323-W2: DHI-ARD323-W2 (868): Communication Up to 1,000 m Up to 1,200 m (3,937.01 Distance (3,280.84 ft) in an...
  • Page 7 Quiescent current 5 uA Consumption Max current 60 mA PS Type Type C Battery Life 5 years DHI-ARD323-W2 (868): DHI-ARD323-W2: General Power Consumption Max. 125 mW Max. 70 mW Indoor: –10 °C to +55 °C (+14 °F to +131 °F) Operating Certified temperature: –10°C to +40°C (+14°F to...
  • Page 8: Detection Performance

    User's Manual 1.3 Detection Performance An alarm will be triggered when the gap between the door detector and the magnetic stick is wider than the distances shown in the table below. Figure 1-1 Detection performance Table 1-2 Detection performance description Axes of Gap between the Door Detector and Event...
  • Page 9: Checklist

    User's Manual 2 Checklist Check the package according to the following checklist. If you find device damage or any loss, contact the after-sales service. Figure 2-1 Checklist Table 2-1 Checklist Item Name Quantity Item Name Quantity Door detector Quick start guide Double-sided Legal and regulatory adhesive tape...
  • Page 10: Design

    User's Manual 3 Design 3.1 Appearance Figure 3-1 Appearance Table 3-1 Structure Name Description ● Flashes green quickly: Pairing mode or reduced sensitivity mode. ● Solid green: Alarm event was triggered. Indicator ● Solid green for 2 seconds: Pairing successful. ●...
  • Page 11: Dimensions

    User's Manual 3.2 Dimensions Figure 3-2 Dimensions (mm [inch])
  • Page 12: Adding The Door Detector To The Hub

    User's Manual 4 Adding the Door Detector to the Hub Prerequisites Device configurations are performed on the DMSS app. Make sure that you have installed the DMSS app, created an account, and added the hub to the app. For details on adding the hub, see the user's manual of the corresponding hub.
  • Page 13: Installation

    User's Manual 5 Installation 5.1 Replacing the Battery The battery has been installed when leaving the factory, and the door detector can be used directly. If the battery is dead, you need to replace the battery. Step 1 Open the back cover of the door detector. Figure 5-1 Open the back cover Step 2 Replace the battery.
  • Page 14: Installing The Door Detector

    User's Manual Figure 5-3 Close the back cover 5.2 Installing the Door Detector Prior to installation, add the door detector to the hub and check the signal strength of the installation location. We recommend installing the door detector in a place with a signal strength of at least 2 bars.
  • Page 15 User's Manual Step 2 Put the expansion bolts into the holes. Step 3 Align the screw holes on the plate with the expansion bolts. Step 4 Secure the attachment panels with ST3 × 18 mm self-tapping screws. Step 5 Put the door detector into the attachment panel.
  • Page 16: Wireless Door Detector Configuration

    User's Manual 6 Wireless Door Detector Configuration You can view and edit general information of the door detector. 6.1 Viewing Status On the hub screen, select a door detector from the accessory list, and then you can view the status of the door detector.
  • Page 17: Configuring The Door Detector

    User's Manual Parameter Value Open or close status of the door. ● Door Status : Open. ● : Closed. Active status of the 24 h protection zone. 24 H Protection Zone ● : Enabled. Status ● : Disabled. The status of whether the door detector forwards accessory messages to the hub through the repeater.
  • Page 18 User's Manual Parameter Description The accessory located in the 24 h protection zone is always active 24 H Protection Zone whether the security system is configured in the armed mode or not. Enable the home mode, and then the selected accessories under Home Mode the hub will be armed.
  • Page 19 User's Manual Parameter Description ● Select from high, low, and automatic. ● The higher the transmission power, the farther the signal can travel, but the greater the power consumption. ● If you select Low, and then the door detector will enter Transmit Power reduced sensitivity mode until you select another option.
  • Page 20 User's Manual...

Table of Contents