Advertisement
32-Element, 44-Element, and
52-Element Outdoor Wideband
Aerials
Can be exterior or loft-mounted
Simple, fast assembly
Boosts picture and audio quality of both analogue
and digital television signals
Wideband, for complete universal UHF reception
HD-ready - compatible with DVB-T programmes
Suitable for Freeview
Page 1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Electrovision 32-Element
Summary of Contents for Electrovision 32-Element
- Page 1 32-Element, 44-Element, and 52-Element Outdoor Wideband Aerials Can be exterior or loft-mounted Simple, fast assembly Boosts picture and audio quality of both analogue and digital television signals Wideband, for complete universal UHF reception HD-ready - compatible with DVB-T programmes Suitable for Freeview...
- Page 2 IMPORTANT Installer and Users please note: These instructions should be read carefully and left with the user of the product for future reference. IDENTIFYING THE PARTS Main boom Extension boom (44- and 52- element only) Reflectors Dipole Cradle (44- and 52-element only) Page 2...
- Page 3 INSTALLATION 1. On all models twist the directors until the plastic brackets snap into place as shown. 2. On 44- and 52-Element models connect the two halves of the boom together using the two brackets, screw and wingnut, as shown above. 3.
- Page 4 4. On 44- and 52-Element models attach the cradle. 5. On all models attach the reflectors using the plastic bracket (supplied in two parts), a screw and a wingnut. Page 4...
- Page 5 5. On 44- and 52-Element models attach the cradle to the top of the mast. (The mast must not extend above the cradle) On 32-element models attach the aerial to the mast as shown below: If the transmitter is horizontally polarised (most main transmitters are horizontally polarised) mount as shown in the left picture.
- Page 6 6. On all models connect the coaxial cable as shown using 75 W low-loss coaxial cable. Never use 50 coax, Ω or any other type of screened cable, as this will result in a loss of signal. 7. Enhanced waterproofing can be achieved by putting a small amount of silicone or petroleum jelly around the lid of the connection box before assembling.
- Page 7 32-Element aerials can be used in strong signal areas. 44-Element aerials can be used in medium or strong signal areas. 52-Element aerials can be used in weak, medium or strong signal areas. These aerials are not suitable for use with FM radio (Band II, 87.MHz to 108MHz) or DAB radio (Band III,...
- Page 8 SERVICE WARRANTY Electrovision guarantees the product free from defects in materials and workmanship for a period of twelve months. Should this unit be operated under conditions other than those recommended, or any attempts made to service or modify the unit, then the warranty will be rendered void.
Need help?
Do you have a question about the 32-Element and is the answer not in the manual?
Questions and answers