Electrovision T143FG Assembly Instructions

27-element tri-bar aerial

T143FG

27-element Tri-bar Aerial

Can be exterior or loft-mounted

Simple, fast assembly

Boosts picture and audio quality of both analogue

and digital television signals

Wideband, for complete universal UHF reception

HD-ready - compatible with DVB-T programmes

Suitable for Freeview

Page 1

Table of Contents

Need help?

Do you have a question about the T143FG and is the answer not in the manual?

Page 1 T143FG 27-element Tri-bar Aerial Can be exterior or loft-mounted Simple, fast assembly Boosts picture and audio quality of both analogue and digital television signals Wideband, for complete universal UHF reception HD-ready - compatible with DVB-T programmes Suitable for Freeview Page 1...
Page 2 IMPORTANT Installer and Users please note: These instructions should be read carefully and left with the user of the product for future reference. INSTALLATION 1. Fold out the two outer bars as shown below, and secure in place with the screws provided. 2.
Page 3 If using a ready-made cable with F-connectors on both ends, adaptors are available, part number F399A (F-socket to TV- coax plug) from your local Electrovision dealer (see www.electrovision.co.uk and click the "dealers" link) OPERATION These aerials are intended for use with analogue and digital television receivers in Band IV and Band V (MHz to 860MHz).
Page 4 When replacing an existing appliance with a similar new appliance your retailer may take the old appliance for disposal. SERVICE WARRANTY Electrovision guarantees the product free from defects in materials and workmanship for a period of twelve months. Should this unit be operated under conditions other than those recommended, or any attempts made to service or modify the unit, then the warranty will be rendered void.