Advertisement
Attention
Turn off the power and disconnect the power plug from the wall outlet before you replace the air
z
filter unit.
When attaching the air filter unit, make sure that the projector is stable, and work in an
z
environment that is safe, even in the event of the air filter unit dropping.
Do not put anything into the air vents. Doing so may result in malfunction of the projector.
z
Illustrations in these operating instructions
Illustrations contained in these operating instructions that show the projector may differ from the
z
actual objects they depict.
Replacing the air filter unit
J
J Replacement procedure
J
1) Turn off the Power and then remove the AC power plug from the wall outlet.
When the power is to be turned off, be absolutely sure to follow the procedure described in
z
"Powering Off the Projector" in the operating instructions of the projector.
2) Remove the air filter cover.
Open the air filter cover in the direction of the arrow as the figure shows and remove it.
z
3) Remove the air filter unit.
Hold the tab of the air filter unit and pull out it in the direction of the arrow.
z
After removing the air filter unit, remove foreign objects and dust from the air filter
z
compartment and the projector's air intake port if there are any.
2 - ENGLISH
Air filter cover
Air filter unit
Tab
Advertisement
