Agilent Technologies 5DX II Series Installation Manual page 34

TABLE 4
Part Number
E7200-61700
E7200-61701
E7200-61717
E7200-61717
E7200-61717
E7200-61733
E7200-61734
E7200-61735
E7200-61764
E7200-61765
E7200-61766
NOTE: The E7200-61436 cable connects to the + and - terminals of the E3615A
Match the laser power supply cable to the power supply serial number.
Installation - 20
Cables from Main Unit
Label
P05040
P03018
P05034
P05034
P05034
CAMERA SERIAL
COM2
P05048
P05049
LD RMT +/-
P19033
INTERLOCK 12V
output block, not the sense terminals.
14. Mobile Workstation Table Assembly
and assemble the workstation "Computer Table"
according to the manufacturer's instructions
included with the unit.
15. Operator Interface Assembly
monitor, keyboard, and mouse and put them on the
workstation table. Connect all cables as shown by
the labels.
also need to be assembled with the mobile
workstation cart.
16. Compressed Air and Ventilation Assembly
Install the air filter canister by inserting and
turning counter-clockwise. Connect the facility air
input line.
To
COMPUTER CABLE
X-RAY SCAN CONTR
EXPANSION BOX
EXPANSION BOX
EXPANSION BOX
E7200-61738 COM2
COMPUTER
MOTION CONTROL
LASER SENSOR
MOTION CONTROL
LOW VOLTAGE PS
The power outlet box and speakers
From
CAMERA
X-RAY TOWER
REAR LASER
FRONT LASER
XRAY TOWER
DIGITAL CAMERA
DIGITAL CAMERA
VIEW CAMERA
FRAME BOARD
FRAME BOARD
INTERLOCK BOARD
— Unpack
— Unpack the
—