Key Digital KD-X1000ProK Operating Instructions Manual
Hdbaset/hdmi/vga/audio via single cat5e/6 (tx + rx set) extenders, support ultra hd/4k, edid control, hot plug control, long range mode, full buffer system, hdmi pass-through, ethernet, up/down ir & rs-232
Page 1
HDMI Pass-through, Ethernet, Up/Down IR & RS-232 technology solutions for virtually all applications where high quality video imaging is important. Key Digital ® is at the forefront of the video industry for Home Theater...
Up/Down IR: Two channels of IR enable control to/from devices connected to ➔ of your KD-X1000ProK Tx unit Tx and Rx units Step 4: Connect your HDMI displays to the output port of your KD-X1000ProK RS-232: Bi-Directional control to/from Tx and Rx unit on DB9 connector ➔ Rx unit Ethernet: Bi-Directional control and/or 10/100 LAN network via TCP/IP RJ45 port ➔...
Application Example Daisy-Chaining Example KD-X1000ProK HDMI KD-X1000ProK 20’ TCP/IP Red Ray VGA Laptop HDMI RS-232 Up to 300’ with Key Digital KD-CAT6STP1X ® HDMI Laptop IR In Local Sensor Display KD-X1000ProK Apple TV IR Remote HDMI Pass-through HDMI KD-X1000ProK Network Router Up to 300’...
Connections Use the port labeled “HDMI Pass-Through” to connect (up to 20 ft.) your AVR, ➔ display or other device to the Tx unit. Active signal corresponds with the current Before making any connections, power off your source and display devices. video selection dictated by current video selection (HDMI or VGA).
Extending Ethernet, IR and RS-232 Control Rx Unit: Using a short HDMI cable, connect your output / display device to the HDMI port ➔ Ethernet labeled “HDMI Output”. 10/100BaseT LAN data (10/100Mbps) ➔ Use TIA 568B or TIA 568A termination ➔...
» Automatic switch to the next available active input » The sleeve of the 3.5mm Male connector must have good physical contact with 3.5 mm Female input/output on the KD-X1000ProK. Some 3.5mm Male plugs feature a plastic sleeve that extends longer than an average sleeve. This may cause poor grounding contact.
EDID Control 232 Mode, Extension Mode, and Hot Plug Detection Control. EDID authentication is provided from the KD-X1000ProK Tx unit to the connected input / source device. The EDID file (AKA “handshake”) is selected using the EDID Control rotary on the Tx unit and provides a list of compatible video and audio formats as well as digital data, informing the source device what it should output.
Page 9
Extension Modes Position RS-232 Mode Extension Mode Hot Plug Detection Control KD-X1000ProK supports two different modes of signal extension selectable using 1001 F/W Upgrade(Tx) Standard Forced HPD ON the Control dipswitches. » Standard Mode (HDBaseT Class A): Supports resolutions up to 4K/UHD...
LED Indicator Lights Specifications Technical: Power: Inputs Tx (Each): 1 HDMI, 1 HD analog video 15-pin Female, 1 analog audio, ➔ » Color: Green 1 IR In, 1 RS-232, 1 TCP/IP » Solid illumination during power on state, as provided by healthy connection Outputs Tx (Each): 1 CAT5e/6 UTP/STP, 1 HDMI pass-through, 1 IR Out ➔...
Please be sure to follow these instructions for safe operation of your unit. E-mail: customersupport@keydigital.com ➔ 1. Read and follow all instructions. Technical Support 2. Heed all warnings. For technical questions about using Key Digital products, please contact us at: ® 3. Do not use this device near water. Phone: 914-667-9700 ➔...
Warranty Information All Key Digital® products are built to high manufacturing standards and should provide years of trouble-free operation. They are backed by a Key Digital Limited Lifetime Product Warranty Policy. http://www.keydigital.com/warranty.htm...
Need help?
Do you have a question about the KD-X1000ProK and is the answer not in the manual?
Questions and answers