Error Messages; Cleaning And Care - Silvercrest SDL 300 C2 Operating Instructions Manual

Error messages

- "OUTZero": There is already more than 30 g
weight in the spoon 1 when the scale is switched
on . Remove the weight from the spoon 1 and then
switch the appliance back on again .
- „UNSTable": The appliance is not being
held stably/level while being switched on . Place the
appliance on a stable support/hold the appliance
level and still in your hand .
– The batteries are low . The batteries will need to
be replaced soon!
– The batteries are dead . Replace the
batteries!
- Overload! The material in the spoon 1 is
heavier than the maximum allowed weight!
Remove some material from the spoon 1!

Cleaning and care

ATTENTION! PROPERTY DAMAGE!
Do not use abrasive or chemical cleaning
materials . These will damage the surface of the
appliance!
♦ Clean the appliance with a damp cloth . For
stubborn soiling use a mild detergent on the
cloth .
NOTE
You can remove the spoon 1 from the
spoon handle and clean it separately in
the dishwasher .
♦ Ensure that the appliance is properly dry before
re-using it .
SDL 300 C2
GB │ IE │
9 ■