Panasonic Lumix DMC-LS1S Service Manual page 7

NOTE:
After replacing the MAIN C.B.A., be sure to achieve adjustment.
The adjustment instruction is available at "software download" on
the "CS-Web from AVC" web-site in "TSN system".
1.4.2. INITIAL SETTINGS:
When you replace the Main C.B.A., be sure to perform the initial settings after achieving the
Adjustment, by ordering the following procedure in accordance with model suffix.
- Step 1. The temporary cancellation of factory setting:
Set the mode dial to " [Normal Picture] (Red camera mark)".
While keep pressing [Optical Image Stabilizer] and " [UP] of
Cross key" simultaneously, turn the Power on.
- Step 2. The cancellation of factory setting:
Set the mode dial to " [Playback] ".
While keep pressing [Optical Image Stabilizer] and " [UP] of
Cross key" simultaneously, turn the Power off.
- Step 3. Turn the Power on:
Set the mode dial to " [Normal Picture] (Red camera mark)", and
then turn the Power on.
- Step 4. Display the INITIAL SETTING:
PDF created with pdfFactory Pro trial version
7
www.pdffactory.com