Related Manuals for TZS First AUSTRIA TP-BF01
Summary of Contents for TZS First AUSTRIA TP-BF01
- Page 1 USER GUIDE BLUETOOTH HEADSET MODEL: TP-BF01 THANK YOU FOR CHOOSING TZS BACKGROUND NOISE REDUCTION FOR CALLS...
- Page 2 In the Box 3.5mm Audio Cable Mono Headset Boom Mic Type-C Charging Cable User Guide...
- Page 3 Overview Adjustable Headband On/Off/Pairing LED Indicator Call Answer/ Play/Pause Type C charging port Boom Mute Switch Rotate Boom Mic Internal Mic Boom Mic AUX Input...
-
Page 4: How To Wear
How to Wear 1. Insert the detachable Boom Microphone into the 2.5mm receptacle located on the headset. Mic receptacle Note: Please fully insert the boom microphone before use. - Page 5 2. The boom microphone can move to accommodate a user’s preference for right side or left side wear. 3. Position the microphone to your preference.
-
Page 6: Operation
Operation Power On Slide the switch to the CENTER position Power Off Slide the switch to position... - Page 7 Connecting How to connect with the Bluetooth device. Bluetooth Bluetooth Devices TZS TP-BF01 Paired Now discoverable Slide the power switch to Activate "Bluetooth" in your the “ “ position and hold device‘s settings and select until ‘pairing’ heard or the ”TZS TP-BF01”.
- Page 8 Calls with a Smartphone Calls with a Smartphone Answer Press 1 × Press 1 × End Call Press 2 × Decline Siri/Cortana/Assistance Press 2 ×...
-
Page 9: Charging The Headset
Charging the Headset During charging the red LED will light. When fully charged, the LED will turn Plug the USB-C charging cable into a computer’s USB port. Plug the USB-C charging cable into a USB wall charger. -
Page 10: Other Operations
Other Operations Muting the Boom Mic: Depress and hold the button for 3 seconds. Muting the internal Mic: (When boom mic is not in use) Depress and hold the volume 3 seconds. ‘ ’... - Page 11 Battery Status: After the headset is powered on, depress and hold the call button 2 seconds to hear the current battery status 100% -75%-50%-25%. Clearing the pairing: While the headset is powered on, press and hold the previous and next track buttons simultaneously for 10 seconds.
-
Page 12: Product Specifications
Mic type and sensitivity: Virtual Microphone -42±3dB Headphone Driver Size: 30mm Battery capacity: 410mAh DC Input: 5V_500MA FCC ID: 2AKI8-TP-BF01 Charging voltage: 5V/2A Bluetooth working range: Up to 10m Talk time: Up to 40 hours Charging time: Approximately 2 hours Standby time: Approximately 273 hours Compatibility: Windows 10, mac OS 10.14 or later,iOS... - Page 13 WARNING Headsets can deliver sounds at loud volumes and high-pitched tones. Avoid prolonged use of the headset at excessive sound pressure levels. Please read the safety guidelines below prior to using this headset. Safety information Use of a headset will impair your ability to hear other sounds. Use caution while using your headset when you are engaging in any activity that requires your full attention.
- Page 14 Always try to keep the battery between 15°C and 25°C (59°F and 77°F). A product with a hot or cold battery may not work temporarily, even when the battery is fully charged. Battery performance is particularly limited in temperatures well below freezing.
-
Page 15: Troubleshooting And Support
Try moving closer to the device you are connected to. When answering a call, I cannot hear anything • Ensure the mobile device is connected to the TZS TP-BF01 headphones and not on phone’s speaker or other audio option. • Increase the volume on your mobile device. - Page 16 There is no sound when listening to music • Increase the volume on your headphones or the mobile device. • Reestablish the Bluetooth wireless connection between the headphones and your mobile device. • Check if the audio app has paused or stopped playback. Headphones will not charge •...
-
Page 17: Fcc Statement
FCC Statement Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.