Rotolight SmartSoft Box Installation Manual page 2

7. Connect the SmartSoft™ Box
control cable to the AEOS 2 /
AEOS 2 Pro.
10. Used the on-screen slider or
left Red Control dial increase and
decrease the amount of diffusion.
You are now ready to shoot!
3. Loosen the 2x Larger knobs
8. Turn ON the AEOS 2 / AEOS
2 Pro.
How to uninstall SmartSoft™ Box
1. To Remove the SmartSoft™
Box turn OFF the AEOS 2 /
AEOS 2 Pro.
4. Remove the small 1/4" knob
and then the SmartSoft™ Box
9. In CCT press the bottom left
icon twice to cycle between the
brightness and SmartSoft™ control.
2. Disconnect the Control cable
from the AEOS 2 / AEOS 2 Pro.
5. Now you are ready to attach our
other light Modifiers
https://www.rotolight.com/product-
category/light-modifiers/