ProAudio CS606TO User Manual page 2

PA speakers » CS606TO
WARNING! Before carrying out any operations with the unit, carefully read this instruction manual and keep it with cure for future
reference. It contains important information about the installation, usage and maintenance of the unit.
General Instructions
• The products referred to in this manual conform to the European Community Directives and are therefore marked with
(100V~). Leave servicing to skilled personnel only. Never make any modification on the unit not described in this instruction manual, otherwise you will risk an electric shock.
• Connection must be made to a power supply system fitted with efficient earthing (Class I appliance according to standard EN 60598-1). It is, moreover, recommended to
protect the supply lines of the unit from indirect contact and/or shorting to earth by using appropriately sized residual current devices. • The connection to the main network
of electric distribution must be carried out by a qualified electrical installer. Check that the main frequency and voltage correspond to those for which the unit is designed as
given on the electrical data label. • Never use the fixture under the following conditions: - in places subject to excessive humidity; - in places subject to vibrations or bumps;
- in places with a temperature of over 45°C or less than 2°C. • Make certain that no inflammable liquids, water or metal objects enter the fixture. • Do not dismantle or modify
the fixture. • All work must always be carried out by qualified technical personnel. Contact the nearest sales point for an inspection or contact the manufacturer directly. • If
the unit is to be put out of operation definitively, take it to a local recycling plant for a disposal which is not harmful to the environment.
Warnings and installation precautions
Never look directly the beam when it's lit.
Description and technical specifications
Ceiling speaker for recessed mounting. ideal for vocal announcements and reproduction of background music.
• Ceiling speaker
• Built-in line transformer with multiple output connections for 70/100V constant voltage lines.
• White ABS body and metal protection grid.
• Quick and easy installation by a special holding system, with no need of screws or other fixing elements.
TECHNICAL DATA CS606TO
Type of speaker Ceiling
Low frequency 6 ''
AES/program power 3/6 W
Input 100 V 1.5/3/6 W
Sensitivity 92 dB @1W/1m (free field)
Constant voltage 70/100 V
Frequency response 100÷18.000 Hz (±3dB)
Input signal Terminal with wire
Cabinet material ABS, Iron
Color White - 9010 RAL
Weight 0.70 kg
Flush-mounting hole (Ø) 170 mm
Dimensions (ØxP) 187x79 mm
Installation
1. Saw out a mounting hole of the required size (see specifications).
2. If PA system is switched on, first switch it off completely before connecting it.
3. Make the connections to the audio system: connect the black core and the red core to the output
of the PA amplifier.
4. With the connection of several speakers observe that all speakers are polarized in the same way (black
core = negative pole).
5. Insert the speaker into the ceiling.
Cleaning the unit and maintenance
• Before starting any maintenance work or cleaning the unit, disconnect the unit from the PA
system.
• Make sure the area below the installation place is free from unwanted persons during setup.
• Housings, fixations and installation spots (ceiling) should be totally free from any deformation.
• The interior of the device should be cleaned annually using a vacuum cleaner or air-jet.
Warning: we strongly recommend internal cleaning to be carried out by qualified personnel!
The information provided in this manual has been carefully checked. However Music & Lights is not responsible for any possible inaccuracy.
Design and specifications are subject to change without notice.
For further information, please contact our Service Center: tel. +39 0771 72190 fax +39 0771 721955 - service@musiclights.it
Ø187
Technical drawing
Rev01 - 10/19 ©2019 Music & Lights s.r.l. - Italy - www.musiclights.it
User Manual
. • The unit is supplied with hazardous voltage
79
installation
GB
Circuit diagram