Bauhn APVK-1222 User Manual

Have you got everything?
A. Foldable Tripod
B. Condenser Microphone
C. LED Video Light
A
Condenser
Microphone
A. Switch between phone/camera mode
B. USB-C charging port
C. Button: increase brightness
D. Charging LED Indicator
E. Button: decrease brightness
F. On/Off Switch: slide to switch the LED
video light unit on/off

Operation

Setting Up
• Set up the tripod to the desired height using the
adjustment locks.
• Screw the phone holder onto the tripod as illustrated,
ensuring it is securely screwed in.
• Extend the phone holder and slide your phone in. The
phone holder will automatically lock and hold you phone
in place.
• Slide the condenser microphone into the LED video light
to securely lock it in place.
• Once the condenser microphone and LED video light are
connected, slide it onto the phone holder as illustrated,
ensuring it is securely locked in.
• Use the handle on the tripod to adjust the angle of your
photo/video.

Using The Condenser Microphone

• Connect the condenser microphones 3.5mm audio cable
to your phones earphone port.
• Slide to switch up for phone mode. Slide the switch down
for camera mode (you camera must support the 3.5mm
MIC input.
• Note: you will need to buy a lighting to 3.5mm adaptor for
iOS smart phones that do not have an earphone port.

Using The LED Video Light

• Slide the On/Off switch to On to turn the LED video light
unit on. The power LED indicator will light up blue.
• Press the Power button to turn the light on/off. The power
LED indicator will turn off once the video light is on. Press
again to turn off the light and the power LED indicator will
light up blue again.
• Use the / buttons to adjust the brightness level.
• Press the Mode button to change brightness settings.
• Slide the On/Off switch to Off to turn the LED video light
unit off. The power LED indicator will also turn off.

Using The Remote

• Slide the On/Off switch to turn the remote on until the LED
indicator starts flashing.
• Turn on your phones Bluetooth
the list of found devices. Once connected, the LED indicator
will stop flashing. (The remote will automatically turn off after 5
minutes if not paired).
• Press the capture button to remotely take a picture.
• Slide the On/Off switch again to turn the remote off.

Charging

• LED Video Light: Connect the supplied USB-C charging cable to
the USB-C port on the LED video light. The charging LED indicator
will light up red. Once fully charged, the charging LED indicator will
light up green.
• Remote: Connect the supplied USB-C charging cable to the USB-C
port on the remote. The charging LED indicator will light up red.
Once fully charged, the charging LED indicator will turn off.
D. Bluetooth
E. AAA Activ Energy Battery
F. Phone Holder

Control and Buttons

B C D E
LED Video Light
G. Mode Button: change brightness setting
H. Power LED Indicator
I. Power Button: press to turn the light on/off
J. LED Light Indicator
K. Capture Button
L. On/Off Switch: slide to turn the remote on/off
and select "SelfieCom" from
®
User Guide
Model: APVK-1222
Portable Phone Vlogging Kit
Remote G. USB-C Charging Cable
®
H. User Guide
I. Warranty Certificate
F G H I J K L
Bluetooth
®
Remote