Bauhn AA-05 Installation Manual

Universal Windscreen Mount
Model Number: AA-05
INSTALLATION GUIDE
When using a mobile phone while driving a car, make sure you keep your hands free to operate the vehicle at all times. This
Universal Windscreen Mount will hold your mobile phone or GPS unit securely on the windscreen in easy viewing distance.
1
A
B

Your new Universal Windscreen Mount

consists of two parts: the windscreen
mount with suction cap (Fig. 1A) and
the phone/GPS cradle (Fig. 1B).
4
A
B
To adjust the mount to your perfect
viewing angle, you can bend the
bracket arm up or down (Fig. 4A), or
rotate the phone/GPS cradle in any
direction (Fig. 4B).
2
B B
To assemble the cradle mount, align
the four holes at the back of the
cradle with the bracket clips (Fig. 2A),
push in and slide firmly until you hear
it click into position (Fig. 2B).
5

To attach your phone or GPS device,

peel off the protective plastic cover, then
press the device firmly against the green
polymer surface (Fig. 5).
To remove the device, hold the cradle
firmly and peel off the device.
3
A
Installing the Universal Windscreen
Mount is very easy. Just attach the
suction cap to your windscreen and
pull up the lever to secure it in place
(Fig. 3).
6

When the green surface is dirty,

take the cradle off the bracket arm
and rinse it with water to renew its
adhesive properties. Let the surface
air dry completely before reinstalling
it onto the cradle mount.