Program Flow Diagrams - Cobra XRS 9930 Operating Instructions Manual

9376-XRS 9930 - 7 FINAL 2/23/06 11:59 AM

Program Flow Diagrams

Your Detector
User Settings Programming
User Programming allows you to adjust the unit's display and sounds to
your preferences. The User Settings can be selected using the Mute
City buttons by scrolling through the settings as shown in the program
flow diagram below. The User Programming Menu Guide on page 34 is a
handy reference showing the tone, visual display and voice prompts that
accompany each setting. After selecting a setting, use the Dim
choose an option within the setting.
NOTE
When you choose User Settings (page 11, step 2a), the system displays whichever
setting was last changed.
Setting Selection Buttons:
Mute Button
Press to move
counterclockwise
around the loop.
City Mode
Restore Factory
(Default)
Settings
Warn Low
Car Voltage
Car Voltage
Show Compass
Color
Theme
Display
SmartPower
(Brightness)
12 English
Page 12
Your Detector
Alert Settings Programming
•
Alert Programming allows you to selectively turn on or off detection of some
and
signals. The Alert Settings can be selected using the Mute
by scrolling through the settings as shown in the program flow diagram below.
The Alert Programming Menu Guide on page 36 is a handy reference showing
the tone, visual display and voice prompts that accompany each setting. After
button to selecting a setting, use the Dim
NOTE
When you choose Alert Settings (page 11, Step 2b), the system displays whichever
setting was last changed.
X Band
Detection
City Button
Press to move
clockwise around
the loop.
Dim Button
Press to choose Pop Detection
an option within
setting.
IntelliMute
This detector allows you to customize its operation by changing settings in
Auto Mute
Not shown
the User Programming and the Alert Programming modes. (See page 11 for
Set
if Intellimute
IntelliMute
is OFF. entering the EasySet Programming mode.) Also, refer to the Appendix (pages
34–36) while programming. These show the lists of User and Alert settings.
Not shown if
Set
Compass
Features of the programmable settings are described on the following pages.
is OFF. Alert Type
(Voice/Tone)
Show
Compass
Program Flow Diagrams
and City buttons
button to choose an option within the setting.
K Band
Detection
Ku Band
Detection
VG-2
Audio
Not shown
setting if VG 2
is OFF.
VG-2
Spectre 1
Audio Detection
Not shown
if Spectre 1
is OFF.
Spectre 1
Safety Alert
Detection
Nothing Comes Close to a Cobra
•
® 13