Program Flow Diagrams - Cobra 12 BAND XRS 9940 Operating Instructions Manual

Program Flow Diagrams

Your Detector
User Settings Programming
User Programming allows you to adjust the unit's display and sounds to
your preferences. The User Settings can be selected using the Dim
City buttons by scrolling through the settings as shown in the program
flow diagram below. The User Programming Menu Guide on page 34 is a
handy reference showing the tone, visual display and voice prompts that
accompany each setting. After selecting a setting, use the Mute
to choose an option within the setting.
NOTE
When you choose User Settings (page 11, step 2a), the system displays whichever
setting was last changed.
Setting Selection Buttons:
Dim Button
Press to move to
desired setting..
City Mode
Restore Factory
(Default)
Settings
Warn Low
Car Voltage
Not shown
if Intellimute
is OFF.
Car Voltage
Not shown if
Show Compass
is OFF.
Color Theme
Display
Display Timeout
(Brightness)
12 English
Your Detector
Alert Settings Programming
•
Alert Programming allows you to selectively turn on or off detection of some
and
signals. The Alert Settings can be selected using the Dim
by scrolling through the settings as shown in the program flow diagram below.
The Alert Programming Menu Guide on page 36 is a handy reference showing
the tone, visual display and voice prompts that accompany each setting. After
button
selecting a setting, use the Mute
NOTE
When you choose Alert Settings (page 11, Step 2b), the system displays whichever
setting was last changed.
City Button
X Band
Press to move to
Detection
desired setting.
Mute Button
Press to choose an
option within the setting.
Pop Detection
IntelliMute
Auto Mute
This detector allows you to customize its operation by changing settings in
Set
the User Programming and the Alert Programming modes. (See page 11 for
IntelliMute
entering the EasySet Programming mode.) Also, refer to the Appendix (pages
Alert Type
(Voice/Tone)
34–36) while programming. These show the lists of User and Alert settings.
Set
Compass
Features of the programmable settings are described on the following pages.
Show
Compass
SmartPower
Program Flow Diagrams
and City buttons
button to choose an option within the setting.
K Band
Detection
Ku Band
Detection
VG-2
Audio
Not shown
setting if VG 2
is OFF.
VG-2
Spectre 1
Audio Detection
Not shown
if Spectre 1
is OFF.
Spectre 1
Safety Alert
Detection
Nothing Comes Close to a Cobra
•
® 13