Linksys WUSB54GP Quick Installation page 2

3 PSK + RADIUS
Select the authentication method
you want to use, EAP-TLS or PEAP .
EAP-TLS
a Enter the login name in the
Login Name field.
b Enter the name of the
authentication server in the
Server Name field.
c From the Certificate drop-
PSK + RADIUS
down menu, select the
EAP-TLS
authentication certificate.
d Select the encryption method
you want to use, TKIP or AES.
e Click Next, and go to Step H.
PEAP
a Enter the login name in the
Login Name field.
b Enter the password in the
Password field.
c Enter the name of the
authentication server in the
PSK + RADIUS
Server Name field.
PEAP
d From the Certificate drop-
down menu, select the
authentication certificate.
e Select the encryption method
you want to use, TKIP or AES.
f Click Next, and go to Step H.
4 RADIUS
Select the authentication method
you want to use, EAP-TLS or EAP-PEAP .
EAP-TLS
a Enter the login name in the
Login Name field.
b Enter the name of the
authentication server in the
Server Name field.
c From the Certificate drop- RADIUS
down menu, select the
EAP-TLS
authentication certificate.
d Click Next, and go to Step H.
PEAP
a Enter the login name in the
Login Name field.
b Enter the password in the
Password field.
c Enter the name of the
authentication server in the
RADIUS
Server Name field.
PEAP
d From the Certificate drop-
down menu, select the
authentication certificate.
e Click Next, and go to Step H.
H
The Setup Wizard will ask you to
review your settings before it
starts to copy files. Click Next to
save these settings, or click
Back to change any settings.
I
If you are using Windows 2000,
you may see a screen
indicating that a digital
signature was not found. This
H
software has been tested and
works properly with Windows
2000. Click the Yes button.
J
After the software has been
successfully installed, the
Congratulations screen will
appear. Click Exit.
I
J
2
Connect the Portable Wireless-G
USB Adapter
A
To connect the Portable USB
Adapter to your PC, plug the
USB end into your PC's USB port.
B
When Windows 2000 begins
installing the Adapter's driver
file, a Digital Signature Not
Found screen may appear.
This Adapter software is tested
and works properly with
A
Windows 2000. Click the Yes
button to continue the
installation.
C
E
For hard to reach USB ports,
you can connect the Portable
USB Adapter to the USB
Extension Base. Then, for better
reception, you can place the
For additional information or troubleshooting
USB Extension Base on a higher
help, refer to the User Guide on the Setup CD-
platform or away from
ROM. You can also call or e-mail for further
interference.
support.
D
Raise the antenna and adjust
24-hour Technical Support
the Adapter so the antenna is
800-326-7114
(toll-free from US or Canada)
perpendicular to the ground.
E-mail Support
E
support@linksys.com
After the Adapter is installed,
Website
the Wireless Network Monitor
http://www.linksys.com or
icon will appear in the system
http://support.linksys.com
tray.
RMA (Return Merchandise Authorization)
http://www.linksys.com/support
FTP Site
Double-click the icon if you
ftp://ftp.linksys.com
want to check the link
Sales Information
information, search for
800-546-5797 (800-LINKSYS)
available wireless networks, or
make additional configuration
Linksys is a registered trademark or trademark of
Cisco Systems, Inc. and/or its affiliates in the U.S.
changes.
and certain other countries. Copyright © 2004
Cisco Systems, Inc. All rights reserved.
The installation of the Wireless-G
Portable USB Adapter is complete.
WUSB54GP_V4-QI-40826A BW